8 replies
by b_pope
the only difference between ECC SDRAM & registered ECC ram is the registered ram delays memory information for one clock cycle to ensure all communication from the chipset is collected by the clock edge, providing a controlled delay on heavily loaded memories.
ECC (error correcting code) memory performs "double bit detection and single bit correction." This means that if you have a single bit memory error, the chipset and memory will find and repair the error on the fly without you knowing that it happened. If you have a double bit memory error, it will detect and report it. Using ECC decreases your PC's performance by about 2%. Current technology DRAM is very stable and memory errors are rare, so unless you have a need for ECC, you are better served with non-parity SDRAM.
I'm not sure what your refering to "RDIMMs", do you mean rambus dynamic random access memory Rambus DRAM is a revolutionary type of DRAM that uses a 16-18 bit data path and is designed to operate with FSB speed of 800MHz, producing a burst transfer rate of 1.6 gigahertz. And their not just for servers.
by thechas
The reason registered DIMMS are only for servers has to do with cost and reliability.
If you price compare, you will see that registered dimms are significantly more expensive than plain SDRAM. For a server that is on 24/7 the extra relaibility isworth the money.
Also, most consumer M-boards do not support registered memory.
You can spend a little bit extra for ECC (error correction) and get slightly improved reliability. But it really isn't worth the cost.
I know that RDRAM was not part of your question, but to expand on the brief comment from the other answer; RDRAM was Intels plan for the future of the PIII and P4. However, DDR RAM has turned out to perform better at a lower cost. Both are not interchangeable with SDRAM.
As to the last comment about RDRAM needing to be installed in pairs, that is only partially true.
On a P3 system you can use a continuity module in place of the second DIMM with no loss in performance.
On a P4 system, the interleave of the memory fields between the 2 DIMMs improves performance. Depending on the MB, you can still use 1 DIMM and a CRIM.
by haddock
Check out these links for RAM explainations, definitions, illustrations, etc.
http://computers.cnet.com/hardware/0-1103-8-6220389-1.html
http://www6.tomshardware.com/mainboard/98q4/981024/
(REMOVE SPACES from the pasted URLs.)
Also, those links go deper and deeper. Follow all the additional links provided in the articles.
Maxwell
by haddock
by haddock
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending