Discussion Locked

What is the form factor

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am putting together a new PC using the perfect chassis, only problem is the old power supply that is attached is just that, OLD...about 8 yrs on a compaq, how do i know if it is atx compatable, and if its not, how do I find an atx that will mount to this chassis? Thanks, Phil

5 replies

by robertgallop

If the case and P/S are 8 years old, there is no way that the case or the P/S will work. I seriously doubt that you will be able to even mount that motherboard in that case without pulling out the jig saw and a metal cutting blade. Even then, you probably can not get an ATX P/S to fit, without more modifications. This is not worth your time when you can get a new case for under $50 with the P/S. Then just transfer the old stuff over (Floppy, HD, etc..) The ram will probably not work on thenew MB either. Hope this helps.

Robert

by phil stake

Thanks for the help, I guess my "perfect chassis" is not all that...Thanks and Merry Christmas

by dmiles

Th shape,packaging,and to a certain extent the function of a motherboard is called it's form factor
Three form factors exist
1)AT-Patterned after the original IBM AT
2)Baby AT-smaller motherboards used in smaller clone machines
3)ATX-Motherboard allows for easier installation of full-length expansion
The way to determine the form factor is look up the mother board manufacturer and the model number will give you the specs
It is possible not ATX compatible,and you will not find one to mount to that chassis,buying a new case is an option that will not be expensive $25-60 dollars.

by phil stake

Thank you very much, I was wondering what that AT and ATX bit was all about, now i know. Thanks

This discussion is closed to new replies.