Discussion Locked

What is this obscure machine?

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a All-in-one type machine here with the name Digital on the front. it has four 72-pin SIMM slots, onr PCI slot, though the machine is only 3 inches tall, a tiny little single-chip NCR scsi card in the PCI slot, what looks like a laptop size IDE controller on the mainboard, 287 pin CPU soldered direct to the mainboard and the heatsink looks to be BOLTED(!) direct to the CPU. thin 3.5" floppy drive with 26 pin connector, 2 PC (type-2?) slots, 3 Flash chips, AT style power, but with midi-din (PS/2) key/mouse ports. Sound, VGA, Ethernet, Serial and Parallel onboard. Eight RAM chips (I assume they're video) under the HDD cage. I can't get it to start up with ANY combination of simms that I have access to. the guy I got it from said he thought it might be an Alpha CPU @ 166, and might need some type of parity ram. Please, somebody help me, I really don't want it to go to waste sitting in a junk pile if it's worth using.

What is it? What kind of RAM should I use? What OS and if it's obscure, how do I get it? Might I be insanely lucky enough to find a manual in existence? Or should I try to sell it? or throw it away?

Thank you for even reading this, and considering.

1 reply

by alpha-male

Sounds to me that what you have there is known as a Dec "Multia" or UDB. These came in a variety of formats - most commonly Alpha 166 processors, 233 processors and Pentium 100 processors. You can tell if its an Alpha or a PC by the power switch. The Alpha is round, the PC rectangular. These use 70ns or faster, 72 pin TRUE PARITY simms. These aren't exactly speed demons, but they are great little machines. I've had several through the years. If it's an Alpha, you can run NT 3.51, 4.0, Linux (RH7.1, etc), BSD, and DecUnix (in soem incarnations). Technically speaking, some say they can run OpenVMS, but there seems to be some debate about that. The Win2000 version for alpha (killed after it reached release status and never released due to some very questionable and shady dealing) will unfortunately not run on the Multia.

Here's a couple of good web sites:

http://spacepants.org/multia/

http://www.brouhaha.com/~eric/computers/udb.html

http://www.elric.com/UDB/udbinsid.html

You can find parts on Ebay quite regularly.

Hope this helps....and have fun with the machine!

This discussion is closed to new replies.