Discussion Locked

What to do with an old AT Case...

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi folks. I have an old 486 computer which has been OK for some Linux experimentation, but has more or less done its job. It's built with an AT case, and I was hoping that I could just get a new Motherboard (and the appropriate bits like a processor, RAM, potentially video/sound cards ... even though my current ones should work) and try an upgrade.

My main question is am I limited to an AT Motherboard? My gut says yes, but I didn't know if there were some ATX boards that could go into an AT Case. Are there any alternatives to reuse the case, or should I just get a new case while I'm getting the board? :)

Just curious. Thanks for any info.

Ed

7 replies

by ebob

You can get a new MOBO (AT), but it's not likely to get you any significant advancement. You might be able to hack an ATX into an AT case, but it would be some work, since expansion ports won't necessarily line up, and the PSU (which you should replace, too) will get in the way.

A new case can be pretty cheap. Even a great case is fairly inexpensive. I would pick up a midtower case with a 300W PSU, and go for it. In a lot of places, you can get a deal with a case, PSU, MOBO, CPU and RAM where the discounts end up paying for the case and 1/2 the PSU.

Just my $.02

by edward_hillmann

Thanks for the feedback! If and when I do this, I'll need a new CPU and RAM anyways. So I'll see if I can get whoever I go with to package a case in as well!

by jereg

I have to agree with answer 1. When I rebuild a PC here at work, I can't get an AT MB, unles I go with a real crappy low end one. All the major manufacturers have stopped making them. If a PC breaks, I order a new MB and case. At home I have a REAL AT case that I've upgraded from 286,386,486 to AMD-K6. I'm looking at a new upgrade, but it's going to mean a new case.
Hope that helps.
BTW, I saw an Outer Limits episode where someone had stacked a bunch of AT cases on top of one another, paintedthem white, and replaced the floppy drives with blinking lights. This was supposed the be some kind of medical device. I thought it was a great use for some old boxes.

by michelinda

I have saved cases and redone pc's a lot of times...but came across one basic problem that people don't think of...

The old 486 has NO HEAT. Okay, not enough heat to matter! The new boards and CPU's are too hot. They simply can't get air. Theold cases were "aerodynamically" correct, they didn't plan their air flow, they didn't have enough exhaust holes, etc. I have completely redone a system to have it have quirk after quirk...and put it in a new case and it ran fine. Beware of "new" motherboards in "old" cases. It is worth the money for the new case.

by edward_hillmann

You're right. I didn't think of that. I've seen some footage from Tom's Hardware about how different chips cope with no cooling, and AMD chips came out the worse for wear in that test. Since I'm looking at AMD chips, I'll want to encourage as cool an environment as possible. An ATX case is a justifiable expense, from this point of view....

Thanks to everyone! :)

This discussion is closed to new replies.