8 replies
by raffi_
Check the fab# of the mounting rail. If it is a coyote you are in luck:
0637 = coyote MDM001017-xx
0481 = greyhound MDM001001-xx
0484 = python SCM001379-xx
0460 = akita SCM001369-xx
0335 = sportster 33.6 SCM001323-01
Coyote support page:
http://support.micronpc.com/apps/srvrhub.asp?Hub=MDM001017-xx
If not then you can check:
http://www.windrivers.com/
Regards
Raffi_
by v-mode
by csmith
Go to:
http://www.usrobotics.com/support/s-main-menu.asp
Click on the box in the lower right hand corner of the screen.
The Product ID software also has a "wizard" that will tell you everything you could want to know about the MODEM.
The USRobotics site is pretty good, (www.usrobotics.com) but this is a fairly old card.
Good Luck,
Regards, Chris
by lo
Might also try
http://www.driverguide.com/
Lots of drivers for everything there. May not have a version that works if your OS is more recent than the card.
Option - you can get reasonably good modem cards for $25-$50, 56kb.
by v-mode
by v-mode
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending