Discussion Locked

Which Desktop Vendor Offers the Best Support?

0 helpful
189 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am looking to purchase 20 desktops to replace end-of-cycle machines.

Based on quality of support, I am wondering which vendor to choose. So far I have requested quotes from IBM, Dell and hp.

Machine specs:

P4 @ 2.8 GHz; 512 MB RAM; 80 GB HDD; CD-RW Drive;
Floppy; On-board Video; Gigabit NIC; WinXP Pro; Office 2003 Basic; 17" Display

System support: 3 yr. NBD 9x5

IBM's quote is the highest of the 3 vendors (by about $2000), but I have heard in the past that IBM support is superior to hp and Dell.

I have purchased from Dell before, but my recent experiences with their support have been disenchanting at best. However, I have never purchased any Optiplex systems -- Wondering if support for these is better since they are geared for the corporate environment.

Haven't dealt with hp support before, so I am curious how they measure up as well.

Like many in IT today, I am a one-man shop serving multiple locations, so getting the best support is a key factor in the purchasing decision. Any comments/suggestions will be much appreciated.

Thanks!

DD

189 replies

by caestelle

I have worked with all three, but Dell the most. I have been very happy with Dell's support, but we do have the premier support, which allows us to do our own warranty work and just send in the faulty parts (so that limits our interaction). I haven't had to deal much with IBM's support; but when I have, I have had good experiences. I have not had to deal with HP in the corporate environment, but when I have supported some home users doing side work, I have not been too impressed with HP's support. But, as I said those were home users and I would hope that they would give a little higher quality level of support in a corporate environment. So basically, I like both Dell and IBM?but the only thing that makes me lean more towards Dell is the fact that IBM costly significantly more like you said. Well that is my two cents!!!

by chromacat

First off - thanks for the quick response to my post.

I am leaning toward Dell as well due to cost, but the difference between their quote and IBM's comes down to IBM's costlier display - maybe I could swing a deal elsewhere for monitors and close the gap. I know it would be pretty hard to sell the costlier IBM quote to mgmt solely on better support - 2 large is too large.

Regarding IBM business desktop support - do you know whether it is US based or offshore?

Cheers,

DD

by caestelle

I am not sure where IBMs support is located, or if that will change now that they have sold their desktop line.

by oz_media

I nCanada it is Canadian based and I have dealt with teh Customer service HO which is in teh states, Carolinas maybe? Not too sure, he had a cool accent though.

BUT, the onsite serive is usually farmed out to local companies that perform work as IBM authorized agents.

As far as IBM vs Dell, The hardware is better, the R&D is liht years ahead, the Business INtellistations are extensively tested and tweaked dto MANY types of professional software (Auto Cad and other intensive apps). And the support is far better than DELL. All in all, as always you get what you pay for, you want CHEAP, you get CHEAP, you want QUALITY you pay for QUALITY.

I have cleaned out more than my share of Dell hardware only to replace it with IBM (and Compaq in one case).

by carlsf1

That you ask and look for the brand/vendor who gives the best support in your area.

It maybe that you have to look not to a brand but to a vendor in your area, that gives the best service.

I have found that buying direct (Dell and others) that their support stinks.

Please remember that price is not so imporant when a server or workstation goes down and you are without it for nnn? days weeks.

Regards Carl (NZ)

by longennamer

Don't forget IBM just sold out their PC division. Might be a factor in thinking about long term support.

by usaatca2001

When I was the IT Mgr. at my last job, I switched to Dell because I was tired of the lack of support from my previous vendor. I bought only the Optiplex line with 3 years, 5x10, 4 hour onsite support. In almost 3 years I had only 1 problem with their support & I believe that was due to a communication problem between me & the support line. Other than that, Dell's support provider (I forget who they were) always showed up when they were supposed to.

However, I never bought Dell online; I always bought through my Dell sales rep & would always get him & my supposed Dell support team involved with any problems. I did use Dell's web site to configure my desktops & check prices.

We weren't a big organization, but I certainly gave Dell enough ongoing business. FWIW

by mechanicalpc

Go with Dell. They made the mistake of oursourcing their corporate helpdesk and quickly corrected. The pricing aside, IBM has always had a policy of promising the moon, and delivering less than. Dell has a way to bypass the need to call for support in parts replacements via their premier support system. You also have the opportunity to get 24hr turn around on any replacement parts. The key is to negotiate the best deal with your corporate rep.
Failure rates within the 3 yr cycle has been <10% overall. Turn around time from order placement to delivery has been <2 weeks depending on configuration. Stick with the optiplex desktops and inspiron laptops, otherwise your playing with fire.

by c-3po

There are other options out there. Because of particular connections, we have been using ACER computers. Many poo-poo them, but they have worked rather reliably for us in our enterprise. I purchase the extended warranties for laptops which take the most abuse, but rarely have any of them gone "down". When they have, their repair centre has dealt with the problems well. We even had an on-site fix for a video card problem we encountered. If you want a brand name, you don't have to stick to IBM, HP or DELL.

by mike_anderson

Ravens04, is it because Dell systems break more than IBM's that you deal with their tech support more often? We switched from IBM laptops to Dell laptops and personally I think the Dell is no where near as good as the IBM. The IBM's just work hard and continue to work hard.

by akruger

I used to work for a compony that had more than 2000 laptops/desktops.
We also had the premier support and it takes you 5-10 min to do the online stuff and by 9 o'clock the next day the parts were there.
Dell has very nice systems and my suggestion do yourself a favour and get dell certified and then us the premier support.

Never been easier.

by mount.tg

We have been a Dell user for many years, really had few problems. In looking at post by akruger, I'm curious what is meant by the suggestion to "get dell certified." You can email me at tmount@superpac.net

by neuromancer

We usually stick with Dell because of pricing, but I have been to a seminar put on by MPC and they claim to have the best support. They even acknowledge that they charge a bit more then others, but claim to make it up with excellent support for businesses. It might be worth checking into. Take it with a grain of salt of course, as they were tooting their own horn I'm sure. But a lot of the stuff they talked about there seemed customer-orientated.

by bhunsinger

While I agree that IBM in that past has had great sup[port, I don't know what will happen with th e China deal. HP has gotten to the answers for me better than Dell. My true slam at Dell is that their support keeps getting worse, and they are getting by on price. My Choice would be a good, local white box vendor with a 3 year warrantee and standard compnents; no vendor BS to deal with.

by chromacat

I did get a quote from the local vendor I normally deal with, but they came in about $1000 more than IBM.

However, you are right that the BS factor would be about nil with a local shop as opposed to any of the major vendor.

Here's hoping I can find a happy medium between cost and BS.

Cheers,

DD

by oz_media

I have tried the white box route. The supplier would quibble over ANYTHING you wanted replaced, as they didnt' have the same overhead to support replacement. The parts were low quality, teh BIOS isn't matched to the hardware, FAR too expensive and R&D intensive and then they eventually went t*ts up.

SO the 5 year warranty we had was good for 2 and even then after a lot of complaining. They also had the audacity to keep asking us to take dead PC's to THEM for repair, even though we were entitled to onsite support.

At the time, they were one of Canada's leading 'white box' builders.

by bhunsinger

We use a company that is 30 minutes away in Columbus Ohio. Have for 10 years with no problems, no quibbles. Builds are spec out as to components, and the software is always present with keys. No ads on the computer, nothing you don't want. Might be $50-100 over on hp business to business for desktops.
My real point is that the compnents are standard. No special memory (Dell) no propietory power supplies etc. Designed to run after the warrantee period, or, take the one year and stock a few parts instead. 20 machines should also get you a price.

by pivert

I totally agree. I support 4 sites in 3 countries (Belgium, France, Holland). Build a good relation with local company. perhaps you initially pay more but you'll sleep better if you know you can tackle problems with 1 call. support from IBM/HP is ok but they'll just swap the machine or part. a local company will (hopefully) do a little extra (install, make link to network etc). I don't expect them to do this for free, but most companies just aren't interested in this kind of service. other problem is that such partners are really hard to find.

by Former member

We have done fairly regular bakeoffs between HP, IBM, Dell... HP has consistently beent he best bang for the buck in our "real-world" tests.

HP has always been very good for support (we have never purchased exteneded contracts, we have just used the basic 3 year warranty, and they have always been very quick to respond and send replacement parts. They have made the process quite painless.

I would recommend using a 3rd party vendor to purchase the systems though. HP's sales for leaves something to be desired. I can consistently get better pricing better customer service and faster, more accurate delivery from local vendors (and CDW. They are our personal favorite), than I can from HP direct.

by dafe2

I've worked with all three vendors over the years.

Every one of them offer tremendous Server support BUT at the desktop.....HP delivers the best in the end. I've found Dell pretty slack when it comes to getting components out....IBM I'm not sure what will happen.

by chromacat

I had nothing but trouble with Compaq desktops back in the day (well, the early 2000's), so I was basically using the hp quote as a reference.

It's good to know that they are worth considering (2 out of 3 responders so far picked hp), since they came in just above the lowest quote (Dell).

Cheers,

DD

Thanks!

DD

by codfieri

In my experience all of them have their strengths and weaknesses. IBM has a great desktop line but the laptops sometimes have little problems (the T30 for instance had a RAM issue) but the support was top notch. Dell has fallen off quite a bit in both support and quality and when compared to HP they come in third but only barely. HP lately has had a massive issue w/ laptop components (specifically on the nc6000 and on their priducts using Toshiba HDDs) and whether it be desktop or laptop you may end up w/a person in India whos name is "Jack". Yeah right.

by oz_media

I live in a pretty remote place on Vancouver Island, IBM techs turn up at my house within 48 hours with a box of parts in hand and go to great lengths to replace ANYTHING without a single question asked as to how or why. I could toss my notbook out the window and the would start replacing parts, no questions asked. IN my third year of onsite support, one more to go.

Compaq offers a nice 3 or 5-Year onsite with their business desktops and they will also turn up the next or same day with an armload of parts that they will install for you.

IBM has GREAT phone support (for BUSINESS desktops) and Compaq's (HP cringe) is even better at teh desktop level ONLY. Compaq support techs in Canada are mainly French speaking but if you're Canadian you soon get used to broken French/English but they ARE very helpful and replace anything without asking too many questions.

They just make sure that if it is software related you are aware they will charge you, as any manufacturere will.

Dell was and still is the most ridiculous excuse for support I have dealt with, just absolutely AWFUL. They don't know JACK and you have to WAIT for parts to be MAILED out that usually don't match former parts so it is hard to retain standards.(in contrast, IBM and Compaq deliver via Purolator within a day or two IF it is a custoemr replaceable unit, if not, a tech turns up with the part ASAP) IBM and Compaq are proprietary and 'standards' is what they are based on, IBM ESPECIALLY, the Intellistations have SO much R&D and standardization in them as well as top quality hardware in a truly toolless chassis design. Just a DREAM to work with, solid as a rock and well supported.

From working in a shop FULL of IBM, HP, Compaq, Toshiab and even some Dell machines, I will give;
-Highend Desktop QUALITY to the IBM Intellistations they are ROCK solid and powerful.
-Standard desktop quality to Compaq for the Deskpro series and more recently the EVO's (500 series) that I just LOVE!
-Notebook QUALITY and design goes to IBM Thinkpads, hand down no second best.

SUPPORT:

-High end desktops, IBM by FAR. These guy sREALLY understand business level support and speed.
-Standard desktops, IBM or Compaq are both VERY good.
-Notebook support, again IBM RULES in that area too.

So I guess It is IBM with Compaq a second best ( I don't cae WHO they merged with, Compaq desktops and Compaq support still walks all over the HP offerings, IN A BUSINESS ENVIRONMENT)those retail boaxes aren't worth the shelf space they occupy and neither is support worth the phone call.

My dime anyway.

by chromacat

I am really impressed at how well IBM has honored your support contract. I pretty much loathe having to call Dell for support, so its good to know that things would likely be different if I went with IBM.

As an aside - Is Vancouver Island remote enough that the techs have to fly in rather than get there by some type of ferry? Just curious.

Regarding going above and beyond - that's in reference to your post. Highly informative and more than one would expect - thanks!

Cheers,
DD

by oz_media

IBM send techs from 2 different depots, I know them all from supporting various machines over the years.

If coming from teh mainland, rare and only if NOBODY is available locally (no they won't make me wait they have someone else come in) they HAVE flown in (I think because it's fun to seaplane up here) and they ave also ferried but the 90 minute ferry and a four hour drive each way isn't too cost effective. Not when you can fly for the cost of one hours service.

The LOCAL tech, about 1.5 hours down island, LOVES coming up here, we usually go for a beer or two afterwards, last time he brought his guitar and I cut a few tracks for him afterwards. He has DAT's with his demo's, and I get a friend fixing the computer for me. VERY nice!

When I got my first Thinkpad, it had a few minor problems right off the bat, they apologized and offered to fix it, or send me the next model up, which I now have. When my headphone jack was cutting out (you know like ALL walkmans eventually do) they replaced the system board the next day, AND the keyboard because the tech 'didn't like the fit' it hadn't bothered me and I still can't quite figure out what he meant.

When I had a COUPLE of pixels burn ou tin my LCD, they replaced it the next day no questions asked, and THAT is rare in notebook world.

When my desktop (Intellistaion M-Pro)was runnig at what I deemed a bit warm,they replaced fans and stuck aroun dto test it, the heat remained but was not effecting system performance so it was no big deal, but I have never been CHARGED for any service, other than buying the beers when I loose a game of darts to the tech.

At this point I really don't look at anything else, I know what has been proven to me, and that's all I deal with as I KNOW what I am getting into, superior service, hardware and support. Spend now and save later.

by chromacat

It would be nice to speak to someone I can understand the FIRST time. I am quite tired of the overseas phone support I get from Dell. "Thank you, come again!" (Apu, The Simpsons)

Others have mentioned that IBM has sold their desktop line. Do you think this will make a difference in the quality of support?

Regarding getting what you pay for, that is certainly true. But it is sometimes difficult to get management to see beyond $$$. Hence, I am leaning to Dell but desiring IBM.

However, I am making progress in getting them to see things from my perspective. Better support = less time spent on repair and more time spent on projects that build the business.

by oz_media

Firstly support, IBM was sold to China, not India, so no Apu at THIS time.

I think IBM will retain it's NOrth American presence as it requires highly skilled techs onsite and therefore IBM MUST retain a local presence regardless of where some desktops are being built now(I heard Thinkpads, it's probably both though, even though MY Thinkpad has manufacturer stickers from around the globe).

DELL is a mail order company, they don't actually exist and neither does quality or support from them. I have NEVER had a problem showing a company the benefits of a real desktop over a DELL. Even the cheapest bugger will cringe at a $150.00/hr repair bill, they will try everything to weasle out of responsibility I find. Not to mention data loss due to low end or loss leader hardware. It seems Dell like sto buy up everyone's crap on clearance and liquidation deals and sell it in their PC's. I have found that out of a half dozen I USED to work with, identical machines, different hardware. Now if you download a BIOS update, how can you possibly believe it has been tested with YOUR configuration if parts are so interchangable? It works with a seagate or WD hard drive, an NVidea or ATI graphics card etc. Sounds like a pretty dodgy BIOS update to me.

Standardization, QUALITY hardware and onsite support makes IBM more favorable to me. And their price isn't THAT exorbitant when you consider POSSIBLE costs due to poor support or even worse failed hardware, downtime, added costs for stuff they deem not covered etc.

IBM and Compaq, 1-800 # that gets ANSWERED, people ask a couple of questions and then tell you a tch will be in touch with you to arrange replacement within 48 hours. Done deal, no problem and time/money is saved. You also get the same part that failed, unless replaced across the board due to a noted failure by IBM. IN 5 years if you had replaced EVERY part piece by piece in 4 desktops, you still have the same 4 desktops you invested in.

Dell is a farce to me, guys that have worked for cheap-ass companies in IT for years will swear by them, usually because they are ONLY concerned about budgets and costs (at one time Dell was even a viable contender), I would think the boss would be bettter off with all the staff working 24/7 instead.

Best of luck with your sales pitch, make it a good one, save yourself and everyone else the hassels of junk.

by rbncs

I completely agree with OZ_Media on this subject. I have noticed the sames kinds of things with Dell hardware as well. If you are looking for return on investment, productivity and uptime, than IBM is the only game in town in my opinion. I have had several problems with Compaq that has driven me away from them and my work with HP has had a similar path. The nice thing about IBM is if they replace a part on a global scale they always replace with upgraded not downgraded equipment.

by Member 30452944

Perhaps Oz_Media has had a share of problems with Dell hardware in the past. Perhaps not - I cannot say.

I can say that in all of the companies where I have worked (large and small) Dell hardware has always been the best thing we have bought. And I continue to buy it today. And most likely will in the future.

Support is great - once you figure out what they want - (go get your DCSE for example) - the hardware is bloodless to work on in comparison to HP, Compaq, IBM, whitebox and all of the others that I have worked on.

In addition if you are not getting the Dell On-site warranty for the three years then I can say that you are selling yourself and their support short.

Keep in mind that I have only worked in the corporate arena, but I am a Dell fan overall. If their hardware breaks they fix it next day. Their online support is outstandinf and I have yet to have a problem that cannot be fixed by a little smarts on my end and some help from them when i need it.

This is tech support right? If you want a perfect piece of hardware that never fails you'll need to spend $5K per PC and get Panasonic Tough Books. Otherwise - stop the whining about it all and look at the mottom line. I can get two Dells for the price of some perfect "high end" PC. If it fails I have a replacement - I save the company money - I keep things running - and that is after all my job.

by mechanicalpc

Anyone who has worked in this industry for more than the past 12 months knows that Dell corporate support is far superior to anything IPM, Compaq/HP or any others trying to compete. Granted HP/Compaq have some of the best enterprise level server systems ever available, but for desktops in an actual working environment, Dell has become the best way to go. They do offer onsite live techs (IBM contract) in most areas of the U.S. Don't know how they handle Canada or Euro.

"Dell is a farce to me, guys that have worked for cheap-ass companies in IT for years will swear by them, usually because they are ONLY concerned about budgets and costs (at one time Dell was even a viable contender)"

Low budgets are a fact of life in the business world today. I.T. is still a "necessary evil" that can suck the profit margins out of a company faster than a bad product or service. The ROI is an intangible that few outside of the industry understand. So is service and reliability. Knowing who to purchase equipment from for whatever purpose you have in mind is something that does not occur from half-baked opinions like the one you posted. It comes from making sure you have all the information from every resource possible. IBM has great systems for the banking and stock market industries, Compaq/HP have great high end server systems for web applications and very large enterprise level applications, and the list goes on.
As a "professional" you have to be careful about giving "opinions" to others without having experience on more than one level.

by jdclyde

At a glance they seem more pricy, but they come with the warranty that covers them instead of a separate purchase.

We have several IBM servers and have only had a problem with one. They had someone on-site the next day and they swapped out the bad parts.

If my butt is on the line, I will go with big blue. They have really come a long way.

by chromacat

"If my butt is on the line, I will go with big blue."

Do I have to pay royalties if I use that line?
Because it makes perfect sense from what most everyone has posted, and is pretty concise to boot.

Thanks for the input!

Cheers,
DD

by oz_media

You WILL post and tell us what you end up doing right?

Enquiring minds want to know, and I wouldn't mind knowing either.

Hey, didn't you have your own TV show with those two adopted black kids and that one prissy daughter turned coke head slut?

OR was that Drummond?

by chromacat

Pretty sure I am not Conrad Bain ;-)

Also pretty sure the first sentence in your reply is in the imperative rather than the interrogative =)

But to answer that question: Yes, I will gladly post with the results of this endeavour. I really appreciate everyone's input. The TR veterans are providing great help as usual. My posts/replies have been sporadic today as I was called out to a remote site to troubleshoot ECM / engine diagnostic software connectivity issues (I work for a transport/logistics company).

Before I forget -- In one of your other posts I noticed that you are a musician (or engineer) with an in-house studio. Very nice. My TR username isn't entirely in jest. I play for the band Fine China [finechinamusic.com, www.myspace.com/finechina (has audio) ; No purchase necessary - URLs posted only for the curious.] Anyway, from what I have been told, our label's owner just bought the Neve console Radiohead used to record "The Bends". Pretty amazing (and pretty expensive!)

Cheers,
DD

by oz_media

I got a console years ago right after AC/DC recorded Who Made WHo, a nice analoge board which I will take over digital any day of the week. Angus's masking tape still sits under two sliders.

I had a chance to buy an old board from a neighbour who recorded Nickleback's demo crap (very punk), but it was too coloful for me, poor compression etc.

I actually am an engineer by hobby, former drummer keyboards from years back, but I have roadied, then managed quite a few bands for 15+ years. I have spent the last 10 years finding North American bands who want to avoid the label mess out here and getting them into European markets. I now only manage two bands, have closed US locations but still promote/distribute for a few other more notable bands in the US.

I work with a FEW local acts from time to time, Trooper, and Loverboy (press only)and handle marketing for a couple of others, that I am restricted from identifying unless I use a disclaimer for ALL my posts. My studio is mainly for engineering DAT's that I get sent from bands in England, yet they also work with POD studios (engineer is Judas Priest's former drummer) and another that Pete Friesen from Alice Cooper operates when not touring with Alice.

I am still unable to peel my eyes away from BC long enough to move home to England and go at it full time again, but I do still handle promo and distribution, some legal services for a few UK bands.

One day

by alastairlee

We were for many yesrs a Compaq and then HP shop. We have 60 sites spread across the country so having good no quibble support was essential for us. Having just moved to Dell because they were able to offer a much better deal on leasing, I will say we are underwhelmed at the quality of their support.

With HP/Compaq we would log a call having diagnosed a HW fault and an engineer would be on site and the part swapped within 24 hours. With Dell however it is impossible to get a part swapped without going through a rigmarole involving protracted email discussions with "support" personnel who sometimes seem to be less technically qualified than our users - let alone our IT staff. This is particualrly annoying when a hard drive is failed, we know it is failed and needs to be swapped, but they still insist on following the script. I'm sure this is because they are more geared toward the Noddy end of the market - home users!

by capnpauly

My company has purchased HP/Compaq desktops & servers, IBM servers, and Gateway desktops and by far HP/Compaq has been the easiest to deal with.
When trying to work with Gateway they make you troubleshoot over the phone with THEIR techs before authorizing a replacement part, even after the a tech from an 'uthorized' service-center diagnosed the problem. Kinda defeats the purpose of having an 'Authorized' service center. ;) They also don't like to carry items for desktops that they don't manufacture anymore. Perfect example is that we have a few older Pentium 3 desktops that they don't carry motherboards for anymore. My service company had to order a replacement motherboard from a third-party company off of the Internet!
While Gateway wasn't on the list of possible choices, after talking with a few of my service company's techs, Dell pulls the same kinda crap that Gateway does when it comes to getting replacement parts (I've also heard horror stories from some non-techie acquaintances). I'm not sure about the whole stocking/manufacturing of older items, but anytime we've needed a replacement *anything* from HP/Compaq we haven't had a problem with (aside from things being out of stock once in a while); even trying to get a hold of older motherboards.

But to wind down my speel here, if I were to do a whole new fleet of PCs, and possibly stay with a company for the foreseeable future, I'd look into HP/Compaq. IBM is decent too, but they are at quite a premium, or a local system integrator if they can provide you with the support you need (I.E. on-site, specific turn-around time, three-year, five-year, etc).
I've also heard that Acer has gotten better over the years and that MPC has all US-based tech support, so they might be worth a look-see too.
But regardless, I'd stay away from Dell (and Gateway).

by frsal

I couldn't agree with you more. Nothing frustrates me more than having to sit on the phone with Dell no mater how many times I tell them I am A+ and I know what the problem is. However I have also had Compaq and HP products and as you say the part arrives in 24 hours. One way I found around this is also to have the Premier Support where you make the call, or for no cost to you choose an authorized repair center close to you and let them do the dirty work they get paid and you get it fixed asap. Highly recommend the 3yr pts and labor.

by aljatrad

Seek out your nearest aid like Fred Langa (Langalist) and go generic you will save thousands and have a more secure system and get A1 support.

by jetula

Any compatible system is eaier on the pocket book, easier to get upgrades for and over all easier to repair. People have to remember that IBM and etc.. are Brand Name product names and nothing more.

Take it from a consumer that has purchased IBM models, Dell's, and HP's. Their support staff are little more than reading a book of dumbie scripts to solve on off issues, anymore than that, look for your new system to take a ride on the reading railroad for a few weeks to their technical support.

Buying a IBM Compatible Computer is the most cheapest and best way to get what you require from your system. AND.. YES all parts in your Compatible come with Factory Warranties.

Final comment..Short Story
Friend bought a Dell, Dell broke down, friends Dell was sent to Dell for repairs. Two weeks later, Dell is home. 1 month later, Dell broke down, friend ask Jetula to repair, I advised friend that if I open this system Dell warranty will be ended. Dell was send to Dell for repair, three weeks later Dell was home. Friend sold Dell and Jetula built friend a faster, better Compatible system with the money made from the secondhand Dell sale. Friend is HAPPY and supported faster then a Brand Name system.

by mikewor

I reckon ypour approach is back to front. find a support organisation you can trust and work with and then buy what they support. If they sell brand names, well and good. If they sell there own 'cheap and fast' brand, also OK because it's their neck on the chopping block. Bottom line:- spend your effort on finding the support organisation and the rest will fall into place

by chuck5406

I recently had the need for some support and I have a Compaq (see also HP) system and used or at least tried to use their Instant Internet support. In a word it is useless. Noody responds and just like when speaking with them on the phone they don't know anything. Of course when speaking with them on the phone you do get to listen to the elevator music while you are on hold. If you have a problem call Microsoft and spend the $40 to get it resolved. If it is a hardware issue hopefully you bought your system from a local tech company and they wil fix it for you instead of sending it off to never-never land with a Best Buy or similar company.

by stadams1

Approx. 8 years ago my department standardized on HP. Really like their support in most instances. We buy everything HP/Compaq: desktops, servers, monitors, printers, etc.... If we have a hardware failure, place the call in the morning, and the replacement part is there next day. If it requires an onsite tech, usually takes two days. We don't have many software issues, except at upgrade time on our HP-UX database server. When we've called in on software, HP has responded quickly 97% of the time. Recently (within last year and half), have had a few issues with hardware support. I think it was due to Compaq integration in HP's system. I have not had any experience with IBM or Dell.

by docklas

IBM no doubt! I've been dealing with about 20 Optiplex in one of our subnetworks.The PC is OK but when problems start then you dont know clearly who will provide you with support.

My oppinion: IBM is superb and if you can discuss they will always be able to give the same prices as Dell, HP....

I hope that this was of help for you.

by danetter

I tried to buy a customized low-to-medium-end workstation from Dell and canceled the order after a month during which nothing at all was done. I would not be confident that a purchase of 20 machines would attract Dell's attention. Be wary about what is covered by "maintenance"; you are probably already well aware of this, but "maintenance" contracts tend not to include software unless explictly stated.

by ricka

I have done warranty work for Dell (working thru another company) and every part I replaced was always with a refurbished part. Just to let you know.

by usaatca2001

Do you really think IBM & HP/Compaq don't use refurbished parts? I worked for IBM for 19+ years servicing IBM office equipment & I can tell you in no uncertain terms that much of their replacement parts were refurbished. Any service company that wants/takes the old dead/bad parts back refurbishes them. Do you think every part that's replaced in your car is brand new? Think again.

by mechanicalpc

Every company does that, just read the warranty agreements.

"The defective part will be replaced or repaired at the sole discretion of (insert company name here) with a new or factory refurbished part of equal or greater value at the sole discretion of (insert company name here)"

by jonatanv

This computer P4 @ 3.0 GHz; 512 MB RAM dual DDR one 512mb chip ( for future upgrade ( insert another 512 mb then you will see a great diffrence on WinXP prosp2 ) ); 80 GB HDD; DVD drive ( Lot of office documents are coming in on DVD disks ) manuals specially . For monitor 17" Dell flat panel 1280X1024 res. . On-board Video; Gigabit NIC; WinXP Pro SP2 ;no diskette drive .; 8 USB 2 slots 2 on front . Warranty: 3 yr.
Preset image installed on HDD .

Use this setup and you should get good setup , the quality of service seems to be nearly as good as my expirience of previous supplier ( HP ) .

Maintainance is 1.0 % so far after 2 years of Optiplex .

by fgarvin

Dell support is great only if you opt in for the Premier Support (Recently renamed Warranty Parts Direct). You have to pay to have a tech certified which increases the cost. If you are dealing with a large number of systems, it is well worth the cost. I get my spares next business day by entering the information on a web site. If you have to deal with their regular phone support, it becomes a real hassle. Also, if you are looking at the optiplex systems, stay away from the GX280. After a large purchase (1100 systems), we are experiencing a close to 10 percent failure rate. Problems such as the CPU fan running at high speeds, bad memory, and motherboard failures. The most common problem is the fan, which is usually fixed by replacing the heatsink. Sounds weird, but the Heat Sink has r-134 in the tubes to disapate heat and either they are leaking, or the contact with the tubes is insufficient to allow the heat to move into the tubes in the first place.

HP Support has been dreadful at best (With the exception of their printer support which rocks). We have sent them 3 laptops that died within weeks of arrival and the turn around time on repairs is in the months range.

Have not dealt with IBM, so I can provide no insight there.

Good Luck.

by hobgoblin

I have worked with HP and Dell and believe that both provide good customer service. However, when it comes to PC, Dell assembles a better PC than HP.

by sturner6

I have a Dell personal computer (i.e. not a business suite) and it has been okay with a few minor problems. But, what really sours me on Dell is an article in "Time" a couple of years back how they fired a number(well over a hundred as I recall) of their engineers. It was no notice, no warning, take no prisoners. Not how you treat people. It has been my experience that how a company treats its internal customers (employees) is reflective of how it treats its external customers.

by james.august

We base our decisions on Cost, Customer Service, and Tech Support. Dell won, hands down, in all 3 catagories.

Because I work for a school district, we get eductaional pricing...and Dell came in the cheapest price for their Optiplex models (currently we order the GX280).
Next is costomer service, this mixed with their on-line Forum website, I get a lot of my questions answered.
And lastly their Tech Support, depending on which warranty program you wish to buy they are the best in any case. We have extended warraties good for 4 years, with a next business shipment on parts replacements. We have a 4 hour turn-around for our servers for an on-site tech and/or parts.
We did the research with all vendors (10 total) and decided that Dell has the best company to deal with. We've never had any major problems yet. So we are extremely happy with Dell.

Good luck in your quest to find a PC vendor.

by llamanirvana

I've had experience with HP and Dell, and it's really true that you get what you pay for. If you purchase the same day support agreement, you get same day support. I agree with the point someone else made that the competence of support gets better the more you invest in it. In other words, the support techs at any of the big 3 will give you less hassle if you purchase a better support plan. I've found that it's generally more cost effective to spend the customer's money to purchase a better support plan up front than when something breaks.
I work with mostly small business, 5 to 50 employees, and Dell hardware has been reliable. Some of my customers have 5 year old Dell PCs and servers that have yet to need any hardware replacement.
One last point I want to make about Dell is that their supply chain is extremely short, which forces them to use reliable hardware. They don't keep warehouses of backup hardware, and they don't have a lot of same-model replacement parts on hand. They literally get fresh hardware off the boat from Asia and it's in the end users' hands 2 weeks later. Yes they refurbish some parts like everyone else, but what does that matter if the part works as you expect it to? Check out the article on them in 11/04 Fast Company.

by scott

20 isn't that many. Just use all Intel boards & CPUs, 7200 SATA hard drives w/ 3-yr warranties, a nice-looking, quiet case like the Antec SLK2650. Stay with DDR1 to keep the price down, so the 915GAVL board. Use Kingston memory. Then use the MS OEM Preinstalltion Kit for your OS installs. Once you have the image, it takes all of 5 minutes to load each operating system, and it would be all customized with your logo. If anything would go wrong with the machines, just throw your image back on.

http://www.microsoft.com/whdc/system/winpreinst/opk.mspx

If anything goes wrong with the hardware, Intel has next day replacement. Keep extra drives on your shelves for quick and easy replacement.

I've been in the position of standing between the customer and the manufacturer, and it can be a very frustrating and embarrassing place to be because you recommended ****. But having built them yourself, you maintain control, and end up looking like a hero when you get them back up and running in no time.

by mandm

Why not try a local computer shop. Their warranties are better & support is right there locally. They usually build a better computer than the brand names. If repairs are required on brand names, their parts are usually proprietary. A smaller shop computer will give you better service. A repair if required can be done within a day or two without calling support overseas.

by dustin_27

I work for a department within our gov't and we have a contract with DELL. I am one of the hardware techs here and when we order parts for dell pc's under warranty, Dell is great for shipping out next day. Not to say their equipment breaks often, but things do happen. A few years ago we had a contract with gateway and that changed all my thoughts about gateways service and equipment. Junk is all I can say about that. Love your site, Thanks

by jim

In any of my contract sites have ended up with Dell as standard. Sometimes problems in communication but in ordering Optiplex's have been able to request and receive consistent parts per model, pay for the service level required either 4 hour on site, next day depending on product (whether server, switch, desktop and what the internal helpdesk can handle). Once the product was received the tech support was very good.
Have also heard that Dell's phone support will be local NA soon. Major support site and support training site opening in Edmonton AB. So shouldn't get overseas translation issues after a while.
Not sure if others can say that..

by seanh

This has been mentioned before but it bears repeating...20 computers is a large enough number that you should be thinking about Total Cost of Ownership. If you buy the white/beige box and the sound card goes in a couple years what will you replace it with? When you replace it will you have to create a new image for that workstation? Here is a story for you - I work for a school board that had 950 P75 computers from IBM...they were work horses and we kept them for 8 years. If IBM couldn't find a part for these things that was an exact replacement they made it from scratch. (They actually built us a new motherboard for one of the machines) One image for 950 computers and the knowledge that even if you have to replace parts that image will still work is invaluable. Speaking of images, buy IBM and you can use their "Remote Deployment Manager" software for imaging (they licensed parts of the code from Powerquest)so they could offer it free to their business customers. Most of the support is done by IBM Partners so the trick is finding a Partner organization that you trust.

Hope that helps!

Sean

by satya_p

Support for DELL Small business is good. But don't go for DELL-Home PCs. There is a difference between how the support is handled for Home & Office/SmallBusiness.

by bleninger

We've standardized on MPC and have been happy. They are based in the US and all their techs are in the US (and the company says they won't be outsourcing tech support). They are price competitive with Dell. We have had a power supply issue - they received a bad batch - but they are easy to work with to get a replacement. Their "all-in-one" unit is worth looking at as well.

by kirkfondren

Our company is making it a standard to use Dell systems. Our current machines we are using are the Dell Optiplex GX280 and SX280 and also the Latitude D600s. Having Gold Support which means a replacement part can be shipped and I will received it with 4 business hours and normally we can get someone on the phone right away for support which is great. Also a 3 year warranty is included (if purchased). We are also toying with the idea of using Dell's printers as well....mostly because of the warranty and cost of these printers. Only sketchy part is that it seems Dell is putting its name on a Lexmark printer....

by radiospanky

I assist with the tech. work in a small accounting company (25-30 computers), and we used Dells all the time until I talked them into trying Howard Computers. They are US based,and their customer support put Dell, Compaq, and HP to shame. They are a little higher in price, but like was said earlier you get what you pay for. We have been useing Howard Computers for a little over 2 years now and only one minor problem which was fixed same day.

by mikeaaaaaaaaa9

I have had experience with all the vendors you spoke of and more. Dollar for Dollar, Dell provides the best support. It is not that their support is better than IBM, it is that based on the cost of it, it far outweighs it. Once you get past the futility excercises by their level 1 techs, it is very very good. If you are knowledgeable in playing the phone game, they win hands down.

by rbncs

I have worked with all three vendors in the corporate environment and I can tell you from my experience that IBM has by far the best support. I have worked closely with their technicians and they are well trained and very knowledgable. I have not been that impressed with Dell's support. When ever I have needed onsite support I have found it easier to troubleshoot and conduct the repair myself than depend on their technicians. I have been totally unimpressed with HP's support and the reasons are too lengthy to enunciate in this forum.

by kevin fitzgerald

Why? I have found their desk top PC's to be so reliable that support has never entered the equation. On the server front Compaq/HP generally fetch up on the day you call them out. More relevant is that they sort the problems quickly.

by hrouda

I do pc support on a college campus with thousands of computers. Dell is the preferred provider with special pricing on select systems (the Optiplex desktop and Latitude notebooks). Many students get the Dimensions desktops or Inspiron notebooks to save a few dollars. I have had dealings with Dell support for the business line (Optiplex/Latitude) and Home (Dimensions/Inspiron) lines and it is like night and day.

The business systems are solid and consistent as far as parts go. You speak to US call centers and parts are promptly shipped (when you have onsite service). The consumer systems are supported from overseas and the experience can be a nightmare.

The other thing that I like about Dell is that detailed service manuals are on line for every model that they sell. They are detailed enough that anyone who can hold a few tools and deal with 4mm screws can strip down and reassemble one of their laptops.

I don't have any direct experience with Dell server support.

Ben
PerceptIS, LLC

by warwizard

I own 4 Dell systems, a PE2300, two Dimension L series, and a Inspiron C800 laptop, the complaints about the consumer desktop support is valid when calling in, it takes hours, even for simple stuff.
Dell is offering online chat tech support in that space now. I recently needed to have a 4 1/2 year old monitor replaced (still under warranty, I bought 5 year parts only warranty), and it took only 5 minutes in the online chat to detail the T/S that I had done, provide the monitor serial number, and I had the replacement monitor the next day, (an upgrade version as the original was out of stock).
The Server and the business desktop/ portable support are light years ahead of the consumer desktop support, calls are answered quickly and you can understand the tech that answers. The opptiplex "gold" tech support is based in Texas, so my recommendation is to consider the opptiplex systems, and gold or premier support options. (Gold includes software support resolutions as well).

I'm looking at replacing my 5 year old Dimension systems, and am considering buying a precision workstation instead of the XPS Gen 4 solely due to the differences in the support.

by ron.riley

PCWORLD.com recently published a list of most satisfied customers with product & service for computers. I believe it was for 2004.
You can go to their web site & hunt down the article. Or I can give you the bottom line.
The winner is: E-Machines.
One of the big factors is the e-machines are supported in the USA. What a novel idea.

The other major players, Dell, HP, Compaq(also HP) and Gateway received Poor ratings.

E-machines make the REALLY cheap machines, so I would look towards getting their top of the line units, with more power. Check the specs.

by kreator

Interesting that Gateway received a poor rating and EMachines a better rating. It was my understanding that Gateway had purchased EMachines well over a year ago.

by longennamer

We replaced all our desktops with Dells 4 years ago. I am a little dissapointed that they are pushing more to India and elswhere, and you can't understand them. But otherwise they overnight parts out to us, I can replace the part or someone arrives next day to install it for me. Also, you will get refurbished parts as replacements no matter what company you go with. Your brand new machines will ship with some refurbished parts! They're allowed a certain percentage.

by blitzsonik

Although I have only dealth with Dell's Desktop Support, I have seen HP's Server support in action and if their desktop support is as good then that would be your best route.

Having saaid that, I would say that my experience with Dell has been flawless - once I started buying the GOLD support option. Now I get an American Tech support person in TEXAS (not INDIA) in about 5 minutes, realistically. They have no problems sending out equipment or technicians to replace parts. Relaxing to know that you'll have atech at your door in 24-48 hours if the need arises - even for a simple hard drive replacement if you want.

-Blitz

by mr l

I would definitely challenge that quote if I were you. I manage an environment with thousands of desktops..not 10s, so I have significantly more leverage, but having said that, I think you could see that ptice drop eaily into the high 1700-low 1800 range with a little "you have to be kidding me" negotiating.

We've had all three at one time or another, so it's not a closed-minded shop at all...but I'd pick big blue.

PS, done all the "what does the Lenovo deal mean to my company?" research already...and my opinion still leans to IBM.

by jpbergeron

Hey they have the largest market share. Consistent service, consistent support, awesome product.

by jagla

I have had nothing but excellent service with Dell. They had a bit of a glitch in the system when their technical support went oversees, but its back now. Servers, laptops and workstations are all built well. If one happens to have an issue and you will it the way of the computer world, Dell?s parts replacement and service were excellent. We had a tape backup unit break and within 4 hours they where here with a new one, that?s service!

by cindiy

We have been using Dell Optiplex machines for over three years and have had good success with them. We have also purchased their highest level warranty, which is an additional $100.00+. The plus to the additional expenditure is that it gets you to a different support team that has been very good at dealing with people who have technical skills, in other words... you don't always have to go through the standard checklist of questions before you get to the meat of the problem. For hardware failures, on occasion, we've received replacement parts from Dell in less than 4 hours of reporting the failure, and we can get the machines up and running quickly when a Dell technician isn't required.

Overall, our experience has been good with them.

by rharber

Another vendor to try is MPC... We buy lots of MPC machines and their support makes the kids at Dell look like kids.. These are very good machines. We use the all in one models and they are super and meet all of your specs. They have other machines as well as they sell servers and laptops also. You won't be sorry for giving them a go. We recommend them highly.

by clwyattjr

I own a small repair shop in PA, and I have dealt with all of the major players in the Desktop arena and, in my opinion, IBM beats them all for support. First of all, when you call you actually get someone who speaks english as their primary language AND who you can understand. Over the last couple of years most of the big manufacturers have contracted out support to India and other similar places. I have called and waited 30 minutes or more only to get someone who I could not understand or who I had to ask the to repeat what they said 10 times to finally get it. NONE of the people have any real Technical experience. How do I know this? Ask any of them a technical question and you'll know. They read from a screen. Every time I have aclled IBM, they have ALWAYS been great and it only takes a few minutes to have someone on the phone.

by timeros

Buy Dell. They have the best price and the best support. Personally, I buy clones. I purchase only Pentium or Xeon processors and quality hardware. I pay the same or less and know exactly what's in the machine. If something does go wrong, or you want to enhance one of the proprietary machines . . you usually have to work with the distributor. I enjoy being a techy, don't need anyone else to help, thanks!

by billhowey

short reply:

1. HP/Compaq problems with non standard off shelf parts.

2. Dell has had problems sending me replacement parts in the past, getting it right the second or third time

IBM allows me to sleep at night re: warranty items. They just know how to do it right and fast. Excellent on desktops, beyond superior on laptops..... they wrote the

by jsmith2

I've only dealt with Dell for my home PC, and sorry to say that the service I received from them was horrible. I had to place a small number of calls to them, and each time was a disappointment.

As to IBM, I've had them work on my AS/400 (and S/38) at work, and they've always been great. The locals guys that they had handle my account were always going 'above and beyond' when the system was down (which wasn't that often: the AS/400 is probably the best machine ever built, IMHO).

So I am willing to admit that we're comparing consumer to corporate service here, but in my own experiences I would never buy a Dell for the home again.

by nnylmarie

I have supported desktops from IBM, Compaq, HP, Dell, various clone or no name brands. I have always found that Dell's support was fabulous. I also found that the quality of the product was really good also - I have worked on thier desktops, servers, and lapops and have always been impressed with the product and the support.

by chromacat

What a response!

I just got into my office (not work) and saw the thread activity emails.

I have to leave now to upgrade Accounting software at a remote location, but I will read all of your posts first thing when I get back.

Just want everyone to know I am not ignoring the thread I started - I really appreciate everyone's advice.

Cheers,
DD

by jagershot

My company not only uses Infotel (Systemax) systems for internal use but we are also a reseller for them. We have sold approximately 2000 systems YTD and we use them for 24/7 support. They are an American owned company whose support and plant are located just north of Dayton Ohio so you will not have to worry about hearing complaints of a language barrier and their techs are highly trained. Three years ago, I negotiated with Dell, Micron, HP, Sony, IBM and Infotel and we found that Infotel was the most accommodating and flexible to our needs as well as the lowest in price. Fell free to call me and I can put you in contact with their senior sales staff and/ or director. My expectations have been exceeded by them for the past three years.

by kennpetty

I have had IBM, HP, Dell and Toshiba machines and I have found IBM support to be the best. Dell was a real disappointment and Toshiba while serviceable was not something to be excited about. Many utilities in the IBM footprint make it easy to keep a gold disk on the local drive and have a client rollback to it to keep them going (remotely) and several diagnostic tools to troubleshoot remotely. I would suggest that you go with them. Their acquisition by Lenovo may influence this- I don't know. Good Luck!

by networkguy55

I am the Sr. Administrator for a mid-size company in the central U.S., and also happen to do all of the technology purchasing. How to decide upon a vendor? I am careful about what I purchase because not only do I have budgetary contraints to work within, but I am also the person who has to make it work after the equipment goes in.

I often, as you did, ask for advice from people who've been there/done that. Having said that, I find that barring a stream of horror stories from a wide variety of people all pointing at a single culprit, the answer is usually "it doesn't matter". Do an apples-to-apples comparison and pick the cheapest thing that meets your current and projected needs (including reliability and support) over its lifetime. Virtually all the time, your equipment will be obsolete before you ever experience a failure with a particular item.

Having said that, we had one department go outside the normal purchasing stream and buy a cheap desktop from Tiger Direct. I put two power supplies in it in two years...I finally tossed it in the trash and gave them a Dell. However, even that is merely anecdotal, another company might be doing fine with TD.

When I started here in 2002 we had all Unisys computer equipment (because they also provided some of our highspeed document handlers). The servers were mostly HP and one or two Dells (Unisys is a re-brander, not a manufacturer). Desktops when I got here were mostly Unisys/HP and (I'm embarrassed to say) a few EMachines.

I made the decision early on to migrate us to Dell, because the pricing was better than Unisys for the same equipment, and we would get direct parts support. We now are almost exclusively a Dell house, with a few Unisys legacy servers. Yes, Dell, like virtually all technology companies uses refurbished parts as repair parts.

(It's why they have you return bad parts--a bad 50-cent thermistor on a laser printer fuser assembly is not reason enough to toss out $100 worth of other parts attached to the assembly...they replace the thermistor, check the assembly's operation, clean it up and put it in the repair parts stream. To do otherwise would drive prices way up on both equipment and service contracts.)

I have installed approximately 25 Dell servers and 100 Dell workstations in my tenure here, and have had exactly two equipment failures (one SCSI backplane riser card went bad, and an LTO tape drive wouldn't eject its tape) so my first thought is I am very impressed with the reliability of Dell.

When we had the two problems, both times, a service person was on site within a few hours (we have 4-hour service) as well as a full array of possible repair parts (not just the one that the Dell phone tech thought might be bad). We have never had a part failure with any of the desktops, some of which which are now getting close to three years old.

This is not to say that you couldn't have the same reliability with another brand, nor is it a guarantee that your first 10 Dell boxes won't be shipped with the same bad part...stuff happens, and as long as they fix it, it doesn't make them a bad company.

Regardless of whom you choose, it might be wise to pick a brand and stick with it. Not only will it be easier to support, but it may give you a bit of leverage if you happen to find your company not performing up to your expectations. We have spent about a quarter million dollars with Dell over the last several years, and while we are certainly not in the big leagues on their customer list, it does get us noticed if we need something.

I don't go as far as insisting every machine have the same chipset or brand of hard drive. Others may have imaging issues to consider and need a common set of hardware to work with for driver compatibility, but our desktops come with everything we need already on them, we don't do image deployment. For our purposes, the differences between components are so minor that spending time worrying about how to support Seagate drives vs. WD is not relevant. A computer needs to store files and run programs, and keep working for a few years until it's time to replace it. Beyond that, the discussion becomes way too esoteric for my purposes. Others can debate those things as an intellectual exercise, but I have a business to run.

The most common objection I hear to desktop phone support is the offshore call center. Personally I don't care who I talk to or what kind of accent they have as long as long as they can move my issue along toward resolution. (They probably think you talk funny too.)

Keep in mind that I'm speaking strictly from the "I want my stuff to work" standpoint and not trying to make any kind of political statement about whether offshore tech support costs American jobs. Personally I don't care about any of that when it comes to doing my job, I just want my equipment to work.

Try not to make business decisions based upon the xenophobic philosophies of others. It will cost your company money, and they need it to pay you. (Climbing off the soapbox)

As far as brand loyalty, I find it usually boils down to a Ford/Chevy debate (Or a Microsoft/Apple debate if you will). What a person prefers depends largely upon what their preconceptions are, and what their personal experience has been, which may be completely different than another's experience.

I almost always discard advice from anyone who argues too passionately for a particular course of action, those who insist their way "is the only intelligent way and everyone who doesn't see it that way is an idiot." Their posts in the forums are usually sprinkled liberally with CAPS which tells me they're speaking from emotion and not giving me data I can use to make an intelligent business decision.

My advice is get the best deal you can and if the deals are very similar, take a deep breath and go with your gut.

by grandrew

I have had limited experience with any vendors other than Dell and Gateway. Dell is GREAT, Gateway is terrible. The limited contact I have had with HP/Compaq has been OK but I would go with Dell.

by jjvolk

You may get a good deal from them, but they all use India or Pakistan or Russia for Tech support. Spend a little more and buy from a local computer store where you can get support locally without having to call around the world and talk to someone who does not speak english as a first language.
On the other hand Dell offers a Gold support that is unparalled. You get to talk to someone in the real USA and get excellant service, but it costs an arm and a leg. Its your choice.

by brian_hasti

I work for a company that has all three "dell, HP, and IBM. I found that when using dell and purchasing there three year onsite warranty has been great. They are out the next day with parts in hand, ready to install. We are running about 300+ dells at this time.

Thanks.

by jonf

I recoimmend a company called monarch http://www.monarchcomputer.com

It has been my experience that a custom system is a much better investment and have found that particularly Monarch Systems is the best out there as far as support and service. If you go with Dell you won't have AMD processors and hardware as an option. We have a mix of Intel and AMD systems and AMD has been by far the most cost effective and best performing with the Athlon 64.

I know there are a lot of diehard Intel fans that will rant and rave all day long that AMD is junk but if you want truly accurate benchmarks and have been paying attention to the technologies that Intel and AMD have released, AMD is years ahead of Intel. Check out tomshardsware.com for benchmarks on all the hardware. Intel has even had to license AMD technology from them for their EM64T line of processors.

My 2 cents.

by luhmpei

We had initial problems with Dell, but have since switched from their Dimension to their Optiplex lineup. the difference is NIGHT and DAY. Better, more reliable parts, better testing, more thorough product and longer life cycles - all important in a coroporate cycle. - if you don't buy all your PC's at once, the Opti is the way to go - they maintain similar specs and identical cases thruought their life cycles - end users will NEVER know the difference between one station and the other.

They also offer Gold Support, which, as it sounds like support is a concern for you, i'd recommend. Priority call routing and quicker turnaround. You also get cross-shipping of parts, so you can swap out hard drives, monitors or whatever first thing the next morning - i mean 8am rolls by and your parts are THERE.

Their Gold Support also gets you past the "have you tried rebooting" tier 1 support. you tell them what's wrong, they send you the parts, or offer to do the install themselves - both ASAFP - its your call as to how to proceed.

Our experience with their corporate support has been amazing.

by 3kl

I work in an org with several thousand desktops and I have for almost 7 years now. Every chance I get I push people towards the Dell Optiplex. The price is significantly better and the support is awesome. Go Gold and you'll have the replacement on your desk the following day. We had/have HP floating around here and I can't wait to show it the door. The sooner the better.

by tehurley

I have been buying all of our computers from MPC (formerly Micron) since 1990. I have had many chuckles about problems with Gateway & Compaq which always swore I would not fix for friends, but usualyl did anyway. Eventually I worked my way out of their repai problems by getting them to purchase from MPC (formerly Micron). On the rare occassion when there was a problem or in one case I was geeting ready to replace a six year old Micron computer and I wanted some very specific information, I called my MPC sales rep and he said: "Just a minute, the engineer that designed that machine is next door" and Jason got him on the phone. He answered my questions, and a few that I had not considered, and I purchased the MPC server.

We have 25 laptops that sometime look like they have been used for seat cushions or in a game of tag football. If I call MPC in Nampa before 3 P.M. CST, I always have exhange shels before 10 A.M. the next morning.

I work for one of the largest not-for-profits in the world. Last week they officially changed from Dell (formerly they pushed Compaq and HP) to MPC because of support.

If MPC's quote should turn out to be $100 more than Dell, consider the cost of poor support. Even at a modest $50 per hour, the MPC computers are much less expensive when considering total cost of ownership. MPC in is Nampa, Idaho and they have great service. For the record, I do not work for or get paid a commission by MPC. But, if someone wants the name of a great sales rep, send me an email.

by mtnweb

I would never buy a Dell after my experience with their support. One of our PCs was a problem from the day we received it. At first they offered to replace the PC but then changed their mind (did not notify me of this change in their decision for 2 weeks); I kept calling support to see where it was). They then decided to replace parts and kept sending parts until we finally gave up and put the PC in our public area. We haven't bought Dell since; I wouldn't wait in line if they were giving Dells away.

You never really know how good or bad support is until you have a major problem.

by mshields

We have a 4 hour turn around time for repairs on our optiplex's from Dell. We only get US support also.

by Former member

I really feel that HP builds a better box and if you have theses 20 boxes in one site the hpp boxes are all pull and plug parts. I have 14 sites state wide and right now I am going with 17 Dell servers and about 150 Dell desk tops due to the fact that my experience since Karly distroyed HP ability for timely on site service at my remotes out of survival instinct I am going with dell wich on their latest build has adopted HP Plug AND Play Parts with no tools needed. The only problem I have had with the Dells was a cble to their CD/DVD drive and they have reenginered that problem with a very good fix. Fuzzywamp

by gdude

I'll wade in on this discussion from a small pc shop repair. The vast majority of repairs are "DELL". Why? One simple reason! Cheap memory is the largest hardware breakdown. Even on new systems or 1 year & older from this scompany. JUst beware of this problem when you purchase from "DELL HELL" or try to get a response from a "ENGLISH" speaking person.