Discussion Locked

Win XP on GA-6BXE motherboard

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to install Win XP on a Gigabyte 6BXE motherboard with a PIII 650. It copies all the files then reboots the system. When it restarts just before the setup it cuts off my CPU fan, so the fan alarm goes off.
I have tried all sorts of settings in the BIOS, upgrading and downgrading the BIOS but nothing works. It does this if I load Win 2000 also. Every thing else 95, 98, ME work fine.
Giga-byte r not helping and I'm ......
Any ideas. Thanks

6 replies

by maxwell edison

The Gigabyte 6BXE motherboard is not on the hardware compatibility list for Windows XP.

I would check with the manufacturer to see if there's a BIOS upgrade to make it compatible.

Maxwell

by majic11

Gigabyte have not replied to my e-mail, but there is no update to the BIOS available. I have the latest version installed anyway. But the XP compatibilty does not show even the new motherboards in the market e.g. GA-60XT or the Ausus CUSL

by thechas

It sounds like you are experiancing a Windows shutdown problem.
I haven't tried to track it down, but my ASUS A7V with XP goes into alarm mode on most re-starts.

I don't have an answer, but I do have a possible work-around.

First, get a fan to drive adapter cable.
Then disable the cpu fan monitor in the hardware settings portion of the bios.

Shut down, and connect the fan to a drive connector.

Install XP. Make sure that shutdown works normally.
Install the Windows updates.
Try re-connecting the fan to the MB.

Another alternative, would be to remove all extranous hardware from the system. Start with just a video card, and the necessary drives connected. Then add hardware 1 device at a time.
XP does seem to be more particular on slot locations for plug in cards. Once you get it running, you will find that all of your PCI devices are on 1 IRQ!

by majic11

Already tried your first solution, but at that time I did not install any updates. I could not find any relevant ones. After installation when I reconnected back to m/brd fan went off again. I will try again and download updates.
Tried second solution today, it did not work either.

This discussion is closed to new replies.