Discussion Locked

Win2000 and Philips Analouge Camera

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have recently upgraded from Windows98 to Windows 2000.
I have a Philips Desktop View Camera (1998 analouge modle) which plugs into its own card. The card has a BT848 Video decoder chip.
I can not get the camera to work now. i have been to various driver sites and got drivers supposedly for this chip and win2000. No luck.
The plug for the camera is 8 pin. What kind of a connection is this? I know its not ps/2. Does any one know the correct name?

Thanks

5 replies

by guruofdos

PS/2 is a reference to the IBM PS/2 range of PC's and not a connector type. It actually refers to the 6 pin Mini-DIN connector as used by IBM and replicated on most ATX style computers. Mini-DIN is used for several standard connectors. 4 Pin is the standard for S-Video (YC), 6 pin for PS/2 style mice and keyboards, and 8pin or more for many camera connectors. The connector you have on your camera is an 8 Pin Mini-DIN. You will have various voltages, a couple of grounds, the composite video signal and possibly audio if the camera has a built in mic. The BTC848 is a pretty shabby chip and most of the Win2K drivers are unreliable at best. Sugest contacting Philips rather than Brooktree to get drivers, if available. The BT484 is manufactured by Brooktree, but you will probably have a SAA7xxx chip or similar on the card. That will need specific Philips drivers.

by guruofdos

PS/2 is a reference to the IBM PS/2 range of PC's and not a connector type. It actually refers to the 6 pin Mini-DIN connector as used by IBM and replicated on most ATX style computers. Mini-DIN is used for several standard connectors. 4 Pin is the standard for S-Video (YC), 6 pin for PS/2 style mice and keyboards, and 8pin or more for many camera connectors. The connector you have on your camera is an 8 Pin Mini-DIN. You will have various voltages, a couple of grounds, the composite video signal and possibly audio if the camera has a built in mic. The BTC848 is a pretty shabby chip and most of the Win2K drivers are unreliable at best. Sugest contacting Philips rather than Brooktree to get drivers, if available. The BT484 is manufactured by Brooktree, but you will probably have a SAA7xxx chip or similar on the card. That will need specific Philips drivers.

This discussion is closed to new replies.