Discussion Locked

win2000 dual processor

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have win2000 server installed on compaq server, and four win2000 professional pcs.
I will add second processor to all computers
will win2000 recognise the second processor
without reinstal the windows?
if no what shoud i do?
important notice //i shoud not reinstal windows//.

5 replies

by wanabedrsean

No windows 2000 will not automaticly be able to use the second processor you will need to load a multi threded kernal you can do this a few ways number one is reinstall the operating system or the manufacturer may have a utility to do this with. or you can figure out exactly what version of the kernal to use and load the driver for it

by allan

You don't NEED to reinstall win2k take a look at Q237556 in the MS Knowledge base for detail but here are the instructions :-

Click Start, point to Settings, point to Control Panel, and then click System.

Click the Hardware tab, and then clickDevice Manager.

Double-click to expand the Computer branch. Note the type of support that you currently have.

Double-click the computer type that is listed under the Computer branch, click the Drivers tab, click Update Driver, and then click Next.

Click Display a list of known drivers for this device, and then click Show all hardware of this device class.

Click the appropriate computer type (a computer type that matches your current type, except for multiple CPUs), click Next, and then click Finish.

This discussion is closed to new replies.