Discussion Locked

Win98 DNS not working

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Win98se with a Dialup adapter. I deleted and reinstalled and need your help.

I can ping the ISP Dns numbers but IE5, IE6 will not see any page. I have install a NIC and DHCP still IE would not connect to a page. Again Ping works. What am I missing?

going NUTS

13 replies

by keyboard kowboy

Suggestions:

- remove tcp/ip protocol and re-install it after rebooting
- re-install windows (last option)
- try running the winsock fix
- search.support.microsoft.com (from another PC) should have some suggestions

by itp

I have removed all networking and reinstalled. I hope to avoid reloading windows. Tell me more about the winsock fix could this be related to the DNS problems?

by cg it

before getting yourself into changing anything especially winsox, stop and reevaluate your problem. Your question says you've got W9X with a dial up adpater, yet you've installed a NIC and have DHCP {????} [DHCP isn't available on W9X]. If you can ping your Internet Service Provider but cant view a web page, chances are you've not configured IE properly. Stop! Start from the beginning and go through the steps to troubleshoot. 1. all hardware and cables are in working order. 2. installed a NIC [including drivers?] and check that it's properly functioning via device manager and there are not yellow exclamation marks or question marks?. 3. You've checked your cable connections from the NIC to your modem? [lights lite up on NIC when you turn on your computer?] You modem is operatin properly? You've configured IE via tools, internet options, connections, LAN settings according to the modems manual?
If after doing all that and you still have problems, try running winipcfg from the command prompt and tell us what it says.

by cg it

Further, provide us with a little more information on your system and how your connecting to the internet. Are you trying to connect via a dial up or by always on DSL/cable modem. If DSL/Cable modem are you directly connecting to the modem via a cat5 cable to your NIC? Do you have a personal firewall? What ISP are you using. Have you contacted them about your problem? What has your ISP told you about using their service for internet connections? [Usually, ISP's have a 24 hr help line to help you connect].

by itp

You have asked the right questions. After failing to get the dial up to work I install a NIC and connectedt to the Dsl in the office. After no DNS with that I knew it is deeper in the OS. Winipcfg give all the right #s The DNS that is giving to the PC from the ISP are right and I can Ping them. This is going to Dos prompt. Yet IE6, Norton and Mail are not finding their sites. I'm getting closer to just reloading.

by larrys

Have you added the correct DNS in your Network Prefer.? On quick check is open you browser and enter a known IP try 198.133.219.25 this will get you to Cisco.com if this works then your DNS setting are incorrect

by admin

Probably nothing....try to go to the command line and type: ftp ftp.piviksnetwork.com, if you get an error message instead of a log on screen than you will probably have to backup your data files and reinstall...i ran into a problem with this on a 95 machine and that was the only way I could correct it, i tried reinstalling the ip stack etc and it was a no go.

Sometimes you just have to let it all go... ;)

Cameron Savage
Piviksnetwork.com - Website Hosting Services
http://www.piviksnetwork.com

This discussion is closed to new replies.