Discussion Locked

win98 won't detect usb keyboard

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

pentium 3,733 mhz
compaq ipaq desktop legacy free
win 98 SE
user was having many lock up and other misc. errors, so I rebuilt a hard drive for her using a spare identical pc then transferred that new drive to her pc. Works fine for a few days, then all of a sudden, it won't recognize the USB keyboard or mouse. Nothing I tried worked. So, I finally took her new hard drive and put it back in the pc it was originally set up with and it starts working.
I start troubleshooting the pc that would not see the KB and mouse using an imaged hard drive identical to the new one I set up for her and it works fine. A few days later, I had to move that pc to a different station in our work room and now the KB and mouse does not work. It turns out, it will only recognize the keyboard and mouse it was originally set up with. I've tried removing usb and KB and mouse entries in device manager and rebooting. I've tried going into setup and finding something there with no luck. In safe mode the mouse will not work, but the keyboard will work sometimes. Remember, this is a legacy free pc. It only has USB ports.

9 replies

by thechas

Have you installed the specific manufactures drivers for the keyboard and mouse?

Windows 98's default drivers are over 4 years old, and thus VERY out-of date.

Even if you installed the drivers from a CD that came with the mouse and keyboard, Iwould check for an updated driver.

Likewise, check with Compaq support at HP's web site for updated drivers for the PC.

One final thought, make sure that legacy USB support is enabled in BIOS settings. (if listed)

Chas

by djent

You might check with KB MFG, ask if their drivers support your USB chipset. I have spotty support for USB from some vendors even on popular Intel chipsets. This one of the problems with cheap integrated motherboards, no ports, no slots, no where togo.

by nakir2000

it's a known problem with win98 version that not detect usb devices .
1-check for the mouse and keyboard devices under their constructor or in the site of compaq for a win98 driver for these devices

by guruofdos

Check that USB keyboard support is enabled in the BIOS. Keyboard drivers have to load before the O/S and the BIOS has to provide basic support for USB before the windows drivers kick in.

This discussion is closed to new replies.