Discussion Locked

Windows 2000 and rebooting

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have flashed the bios, replaced the CDRW, replaced the cables, replaced the CPU cooling fan, reinstalled Win2000, uncheck DMA, downed a six pack and tried every thing MS had in their KB!
It has 512 mem, two HD, I backed up the C drive and installed a new 500 gig drive, I put in a new cdrw drive, I removed and put the memory back in, I ran mem test on the memory with no problems.
I found a bottle of wine and installed it in me.
Then I went through all of the FIC's FAQ?s about the mainboard.
This was a post that I had before, about this system rebooting after opening some programs. I thought that it might be virus related or power a related problem.
The system has a 330 power supply and seem to do great with other devices.
The computer has one cdrw, one zip drive, two HD, and one floppy drive.
One gotcha is the installation of sp4.
Help.
I will install wife 2.0 next if I do not get any help!

16 replies

by jon

What you didn't do is make the problem clear to us.

You are running Windows 2000 server or pro?

Make sure your two drives are together on the same ide channel and that their settings are either Cable-select or master/slave dependent upon the particular configuration.

Firstly, remove the initial drive completely and install windows. Make sure it works without your backup drive. If it does, then attach the old drive. If it fails at that point, it's either the detection of the drive position on the chain, or it's getting confused by the two disks having boot sectors. Add that older drive as a USB external drive to see if you can access it.

Once you can, if that's the solution, move what you need to the system drive and wipe out the older drive.

by santoshthorvatkar

Hi,

I have redden all.

Do boot ur system with dos or 98 bootable n check if it restarts. The restarting problem likely comes with the memory. if problem persist remove the M/B out of CAB and start the PC.If anything doesnt work undo the last change u had done with the system.

Wish will help u.

Regards,

by gigelul

I had the same issue with two PCs, few months ago.
My conclusion was that the problem comes from the mainboard (the capacitors were a little bit swollen, 3-4 years old mainboard)

by icb's corner

Maybe it a good ideea to link the reboot to increasing temperature in computer case. Then temperatures of cpu and motherboard ...
If you have problem with motherboard's capacitors, you can identify that by a specific smell which came from insulator of capacitor. It can be fixed by removing old capacitors and replacing.

by cg it

reboots all the time?

try booting to safe mode see what happens

might consider a larger power supply.

Forget the wine and beer. it's Wine Women and Song.

by hal 9000

I would be looking at the Electrolytic Capacitors near the CPU as a first option but I would also be changing the jumpers on the HDD's to Master and Slave instead of CS particularly if there is a Seagate Drive involved.

I too would recommend trying to forget the OS and see if the system is stable if you don't have a floppy available to boot from you can always try The Ultimate Boot CD and run one of the open ended tests and see if it restarts.

http://www.ultimatebootcd.com/download.html

One of the CPU or M'Board Burn Tests will be the ideal option here as if left alone they will run till the system drops or the power fails. If there is a M'Board or CPU problem this will be identified here and you'll not have Windows mucking you around.

[b]Please Note NEVER under any Circumstances install any OS greater that Girlfriend 1 they all just use up more system resources with less out put so all you are doing is slowing down the system and it's costing you more to run for less. [/b] :^0

Col

by zlitocook

This is a strange computer any way; I checked my records about a year ago. I replaced the power supply and put in a larger hard drive, the power supply failed. I removed the zipdrive she never uses it, the CD-ROM was on the same cable as a slave. It is now secondary master by it self. I removed the second harddrive and still have the same problem. I put new memory in and new cables, I ran Bartpe system test and it did slow down after 30 min. I checked the motherboard there is no smell or swollen cap. on it. I did check FIC had no problems with capacitater's on thier mainboards. It seems to only reboot now if you are using the CD-ROM or go to it through explorer.
The only thing I can think of is that the IDE controller for the secondary is starting to go.

by zlitocook

Her boss bought her a better computer I am keeping the old one to play with. Mabie I can figure out what is wrong with it.

This discussion is closed to new replies.