5 replies
by opatzg9
I see 2 possibilities here:
1) the cdrom drive is the d: drive and you can change the mapping for that in the device manager to allow the second hard disk to be drive d: just set the cdrom to e:
or
2) the root directory of the d: has a file in itassociated with autorun cdroms, erase it. This means you or someone helping you copied acdrom to the d: drive at some point to create this situation.
Or actually 3) the hard disk is not registering and the cdrom is the next device.
Good Luck!
by abadillo
by dmiles
Sounds as though the BIOS is not recognizing the Hard drive
Boot the system at the startup page press the designated key to enter setup (look in bottom left-corner for key)
Once in CMOS configuration check to see if the drive is detected or set toauto to see the drive detection,you can do this in the right side pane by selecting auto detect
This may also require that you update the BIOS to recognize the large hard drive
by abadillo
by abadillo
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending