Question Locked

Windows XP Install Driver for SATA - floppy is not found 2nd time

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to install XP on my Toshiba notebook (Portege S100-S213TD). I have followed the descriptions and am using an external 3.5" floppy drive.
The installation program finds the Toshiba RAID, SATA driver and Everything goes well until I have picked the partition to install Windows and the SATA driver has to be accessed again. This time the floppy does not respond at all, the installation program can't find the file needed and the only option is to exit from the installation.

Has anyone experienced this problem?
Thankful for help.

8 replies

by oh smeg

When you attempt to install the SATA Drivers.

You need to use the Recovery Disc with Slipstreamed Drivers to install the OS properly. Or you can follow the directions here and make your own Slipstreamed Install CD

http://tinyurl.com/ypmx8g

Col

by tech

Hi there,

I also faced the same problem. I bought a new Toshiba Satego X200 X20o notebook. It came with Windows Vista Home Premium. I had to install Windows XP on it, but as usual Intel HDD controller drivers caused problem. I had to look for a solution without a FDD. And answer was modifying my windows XP installation and integrating drivers on it. I used a free application for modifying my installation and integrating drivers. Because my first manual attempts ended up with many useless bootable cds :)

So you may use nlite ( www.nliteos.com ) to integrate your SATA/RAID drivers. and it would avoid any problem you faced with FDD

Hope it'll work
Thanks

by xand_daot

install software "nLite"
ver. nLite 1.4.1 Final
create new cd xp boot install + driver raid.

by gboyd

I went through a lot of trouble to answer this. I had to register on this site.
SO here goes. I had the same exact problem.
I bought a Toshiba floppy drive off amazon.com for 25 bucks (new) and this SOLVED THE PROBLEM. I was using an Iomega floppy and this worked for the first install of the drivers for the SATA.
The second time around, the system did not find the floppy.
HOWEVER, although this did solve this particular problem, the computer would NOT reboot to restart the Windows XP install.
This is a problem I have not figured out yet.

Best Regards.

by oh smeg

And make your own Slipstreamed Install Disc with the SATA Drivers included. Of course if you have XP. XP SP1, or XP SP2 you can also include the XP SP3 files and install the XP SP3 OS saving yourself time and effort.

You can download nLite free from here

http://tinyurl.com/e2mo4

Just remember to read the directions on the Web Site on how to use this application.

Col

by pshqs

Dear after downloading the file, connect the floppy drive in the shut down state with the laptop. on the start keep on pressing f3, it will take you to the manu where u can enable sata hdd.

regards,

by jonnybravo

I know this is an old post but did anyone ever figure it out? I am in the same boat and really need to get this thing fixed. I can get the os to go past the f6 portion and I slipstreamed the Toshiba RAID driver into a copy of XP tablet 2005 but after I set the partition and start the load, it says to put the floppy containing the RAID drivers in but does not appear to see the floppy drive. I have an external floppy and it is not Toshiba but I have done this before and it worked perfectly. I cannot remember if I ended up using the floppy drive or if I had the right driver slipstreamed in the OS ( used Nlite) but I know it worked before. Any help would be greatly appreciated.

This discussion is closed to new replies.