Question Locked

Windows XP Restarts automatically before logon screen comes.

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I am using a PC with the following configuration.
Asus P5GD1-VM (intel 915 chipset )MotherBoard.
3.0 GHz HyperThreading Techonlogy Processor.
250 GB Sata hard Disk.
512MB RAM.

Now I have no problem with my previous monitor which is LG 15" CRT monitor.

Recently i bought a LG TFT monitor (L1730S) and when i connected to my PC, windows restarts beore the windows logon screen
appears.

If i go to the safe mode and disable the Graphics adapter from device manager, then it works fine.

So there is a problem with my monitor and Graphics card. can any one guess the issue.

thankyou,
praneeth.

7 replies

by older mycroft

You didn't list the graphics card in your machine spec.

What Graphics Card are you using?

Depending on which card you have, it MAY require its OWN power supply. Is it connected?

Have you checked its seating in its expansion slot?

Is it getting power?

by rob miners

the last time that you updated your video drivers?

by meetppr

The graphics card was not an external card.
Its in built with the motherboard.
(Asus P5GD1-VM (intel 915 chipset ).

I had the recent update on the drivers.

I got this problem earlier also, but some how it got resolved with out disabling the graphics adapter.( I dont know how).
But now when i reinstalled the windows, its again giving me the same problem.

Any Help ?

Thankyou,
praneeth.

by rob miners

My Computer, Properties, Advanced, Startup and Recovery and untick Automatically restart.
This will Blue Screen the PC when it restarts.

Reset your video back to normal.

Restart the PC.

Take note of Stop 0x000000 error message and post it. Also any other reference to files such as .DLL .SYS

by meetppr

Hey i got it myself..

After installing the drivers of the graphics adapter as well as the TFT monitor drivers, i should go to the desktop properties > settings tab. In this window select the new monitor in the drop down box displayed and click apply so that settings get applied then and there.
Now if you restart there is no auto restart problem.

This discussion is closed to new replies.