Question Locked

Windows Xp Setup recognises hard drive as 4028mb but can't use it

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Guy's can anyone help.

I have trawled the net for answers. I have two 40gb hitatchi travelstar IDE 2.5" notebook drives that my Laptop (acer aspire 1360) can't properly recognise when installing windows. Win xp recognises
botht as a 4028mb capacity but say's that it is not suitable for an install and won't let me create a partition.

I have updated the bios on the laptop (via external floppy) in the hope of being able to get it recognised, but still no joy.

There are no options for adjusting the settings pertaining to Hard drives in the bios whatsoever.

I have also tried to install on a usb pen.

Anyone any ideas.

Thanks

Ali

8 replies

by poppatab

Hello,

Your first and second problems are: Windows Xp Setup recognises hard drive as 4028mb. Windows will not install on what is called a 4 Gib drive to start with. If you simply forgot a zero as in 40028Mib which is about the size of a 40Gib drive. Are these drives new? If you did a format on the drives you may have deleted a hidden partition. The quickest way to see about your drives is to click start, then run, then type in cmd and hit enter. When the black screen shows up type after the prompt chkdsk. Windows will object to checking the disk that is primary and will do a none repair disk check. If you have no windows on the machine, go into bios and have a look at the disks to see what the bios is seeing. If bios shows only 4028Mib (mb)then a quick check of the disks is in order. Go over the instructions sent with the drives if they were Retail version, or go to the product website to be sure of the external settings and or what could be reporting the small size of the drives. If you are using the recovery disks with your note book on a new drive, it will not work because the laptop cds are looking for the recovery partition on your drive. It is quite probable that the drives may be bad. If you can test them by hooking up to another machine to see what Windows reports, it may go a long way in terms of fixing things. The bios screen should be able to tell you what size the drives are that you have connected. Another machine should be able to see the drives as local disks and give you their size as well. More information on the drives would be very handy like: if new disks or used, etc and maybe the model numbers as well. Knowing what the drive nomenclature is would be helpful to know.

by alictait

Thanks for your detailed reply.

The drives are used 4k40 drives that have been given to me by a friend. They were believed to be working. At this time I have no means of testing then on another pc but have ordered an enclosure to do so. I was hoping to maybe gain other info prior to receiving.

I'be unfortunately not missed a 0 out on the drives size. The Bios on these machines is truly awful and the only information it gives about the hard drives is the serial number. and make. No options to change or sizes. Other threads that I had found were predominantly for sata drives and were advising to change options. There appears to be no changeable hard drive options on the bios.

more info on my drives can be found at

http://www.hitachigst.com/hdd/support/4k40/4k40.htm

Thanks

by poppatab

Hello,

I had a 20Gib drive that was working well when I replaced it and put it aside. A few years later I decided to put a Linux distro. on a machine. I got out the trusty old hard drive, hooked it up and tried to use it. Windows was never able to see much more than 8 Gib on the drive. A reboot had windows now reporting the 20Gib as an 80 Gib drive. Long story short; was not able to use the drive for more than a paperweight. I would imagine if you do try to format those drives you will find windows is unable to do the job. Even if you use a product like EaseUs, it will be hard to do anything with the drives. I may be making a huge mistake here because both drives seem to be reporting the same. I would say your friend gave you two paperweights. If you do manage to get the drives to work in an enclosure, I would test them well before I put any data of value on them. I see that the drive has a 4200RPM which is fairly slow compared to 5200, 5400, and 7200RPM drives on the market. The 4200RPM drive will give you slower access to your data and run fairly cool. A 7200RPM drive will give you faster data access at the price of creating more heat. I would still consider the drives your friend gave you to be paperweights. The 4200RPM drives would work in an enclosure and bring less heat provided the machine can actually recognize them. I would say with both drives converted to RAID system still would not provide enough of a back up. The current price structure of high capacity drives in retail provides for a lot more bang-for-your-buck. A few months back I was able to buy a Western Digital Elements external 1Tib for just over $100.00 with tax. If I were in your situation I'd look for a drive to put in the enclosure that has much more space for half of what I paid for the external.

by jonathan.wayman

If the bios is truly reporting that the drives are only 4028MB in size... it sounds like even the latest BIOS update does not support drives over this size. However, I have not seen a machine that didn't support larger than 4GB drives since about 1999 or 2000. How old is this laptop?

What we used to have to do is install a utility (from the hard drive manufacturer) that essentially adds a layer in between the operating system and the hard drive controller which would present the drive to the operating system as being the correct size. Don't ask me what the name of the utility was.. they were manufacturer specific and I don't recall ever dealing with this issue on a machine I was going to install windows XP on. Does this laptop meet the CPU and memory minimum requirements for XP?

http://www.microsoft.com/windowsxp/sysreqs/pro.mspx

by alictait

Hi again,

The laptop has a 2800 sempron processor and 512mb Ram, so not a problem on that count. Also came with the win xp pro sticker.

I think I ain't gonna get anywhere unless I try a know working drive. I don't want to buy one though until I make sure its not the laptop at fault.

Thanks for the help guys

by rearmedhalo

Because, from with what you say, you are trying to install windows xp to a removable disk. Without tweaking the windows install you cannot install windows to an external drive.

http://www.ngine.de/index.jsp?pageid=4176

try the link abovee. I never have had the need to do this but these instructions should help.

This discussion is closed to new replies.