Discussion Locked

Windows XP Too smart for its own good?

0 helpful
20 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'll try to keep this short.

Basically I'm developing on a PC system Running XP.

The system has no keyboard so that users can't start playing around.

Problem is, i have a Magnetic Card Reader (MCR) which plugs into the PS/2 Keyboard port (No Drivers Needed).
Because there is no keyboard present on boot up, only the MCR present, XP refuses to load the Keyboard driver rendering the MCR useless.

Go into DEVICE MANAGER with no keyboard attached to see a demo....

The MCR sends its signals as keystrokes through the PS/2 port. As theres no Keyboard to emulate, the strokes go nowhere.

Kind of useless.

All i need is to tell XP that there's a keyboard present when there isn't one plugged in.

Even Microsoft are having troublesolving this one.

Kind of throwing it out as a challenge or incase anyone has had similar problems.

All works fine on Win98 platform. (Because there's a keyboard in DEVICE MANAGER).

Really need this on an XP install though, so Catch 22....
ps
I am serious about the points on this one...
More explanation available on request.

20 replies

by thechas

Admittedly, this is a work-around.

Use a PS2 Keyboard splitter.
Buy, or grab a cheap keyboard.
Take the keyboard apart, remove the small circuit card and mount it into a box.

XP will find a keyboard, so the driver will be installed.
Users will not have access to a keyboard, as the keys are not there.

You might even be able to set things up on a bracket with a PS2 connector, and keep the device inside the PC.

Chas

by mike_j_sherlock

Sorry, already thought of that. But for the number of units we want to put out, this really wouldn't be costeffective. Pluss we don't really want to get into a manufacturing process.

by rcom

Chas has a solution that should work. Some Kiosks have a simular setup. The keys are exposed but the control board is inside the unit and there's a switch to turn the keys on. The card swip is connected to that same board. The board is connected to the keys port on the internal Net PC. I assume it works in pretty much the same way as you've mentioned.

There's small lockable covered keyboards. You could get a flexible keyboards and hide it inside the case. There's trays that fit under the monitor that has locking drawer for keys. If you look on the Point of Sales sites you'll find something.

by dustyd

Probably will have to use a MSR connected via RS232 (serial) port. That way, no keyboard required.

by thechas

More Ideas.

1. Could you use a USB to PS/2 adapter to plug your device into?

2. I found a few pre-made devices to simulate a keyboard for a PC.

http://www.cadesigns.co.uk/dk1b.htm

http://www.mctech.com/kbdghost.html

http://catalog.blackbox.com/BlackBox/templates/blackbox/itemgroup273guest.asp?param=455&ig_id=273&title=GHOST+Emulators&related=

Remove any spaces from the pasted links.

A software option may be to add a program to the run list that merges in the required registry keys for XP to believe that a keyboard is installed.

Chas

by cvchristensen

If cost is not a major factor for you, I would try a small (2port) KVM that has keyboard and mouse emulation. Just use the device in the ps2 keyboard port. the switch should provide enough emulation to allow the driver to load. If it failed to load with it set on one port, try to boot while the switch is set to controll the other port.

by zlitocook

We had the same problem. We put the keyboard in a sack or contaner in the back of the computer desk. No one could get to it unless they pulled out the computer desk. And it let us get in and fix problems with out rebooting!

by mike_j_sherlock

No-One seems to be able to help on this one.
I'll leave it open for as long as possible in the hope someone can tell me what i need to know.

How can i load the keyboard driver without a keyboard or any other device plugged in???

by thechas

A couple of thoughts / comments.

First, typically, a 1 month old question will not get much more attention.

I suggest that you close this question and post a new one around 10AM US Eastern Standard Time on Monday to get the most attention.

Specify that you need to load Windows XP keyboard driver WITHOUT a PS/2 keyboard attached, to run a device that ONLY connects to a PS/2 port.

You could also consider posting this in the discussion center.

I still believe that your most cost effective work-around is going to be to use keyboard controller circuit boards either in the chassis, or mounted into small boxes.

Chas

by thechas

Hello,

Someone else just posted a similar question, and I got a new idea.

I think that the problem is not Windows so much as it is the BIOS.

You need to "fool" the BIOS into believing that a keyboard is connected.

The "easy" way to do this would be to work with a 3rd party BIOS supplier such as Unicore software
www.unicore.com

Have them create a custom BIOS that always thinks a keyboard is connected.

The only problem with this approach is that you need a specific BIOS code for each different motherboard you use.

Chas

This discussion is closed to new replies.