Question Locked

Windows Xp won't boot

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

(I should add that I can't enter commands in the post prompt). I have B.Opt and BIOS setup.

I can get the PC to boot post bios, it will not boot from a cd. The default boot takes over no matter what. The boot.ini file is corrupted and so is the hal.dll, no changes were made in the registry that I knew of before this happened. This computer has also not been on the net for a month,(asuming no viruses). I have a flash drive and have copied these and the bootfix.iso as well. I also have a copy of Win 98 SE, with which I suppose I have to make a bootable floppy to get at the sys files, but I've never done that before can you give me some advice?
Thanks.

2 replies

by oh smeg

And save the Changes as you exit BIOS so that the system can boot from the Optical Disc. I'm not sure what you mean by

[i]I should add that I can't enter commands in the post prompt[/i]

The POST is just that a passing of the Power On Self Test. There is no way to enter any commands at that stage other than maybe opening the BIOS by pressing the Key listed on the POST Screen.

Generally it's on the Bottom Left or Middle of the screen something along the lines of Press ##### to run setup, where the ##### is a Key like Del, F2, Exit or F10.

If you are seeing a C;> Prompt it is a Windows Prompt and the system is attempting to boot from the HDD which has had the Data on it corrupted. Type in [b]Help[/b] there to see if anything at all is available.

But all you really need to do is with a M$ Branded Install Disc is to do a In Place Install by following the directions here

http://support.microsoft.com/kb/315341

This discussion is closed to new replies.