3 replies
by timwalsh
The biggest issue you will need to resolve is line of sight. At the frequency that most modern wireless solutions operate at (2.4 - 5 GHz), you need CLEAR line of sight (no intervening buildings, foliage (trees), highway overpasses, etc.) between the antennas on the 2 buildings. Be aware that at distances above 6 miles, curvature of the earth can become a issue (you may need a tower to place your antenna on).
It is one thing to connect two buildings via wireless when ther is only a short intervening distance (hundreds of meters). With the distances you are talking (with all the design considerations involved), unless you are an expert in radio communications (with a thorough understanding of antenna theory), your best bet would be totalk with one of the several wireless vendors that specialize in this type of installation (Cisco, Orinoco, Harris, Enterasys, etc). It may be more expensive than doing it yourself, but you have a much greater chance of getting it right the first time. As far as routers and nics, the networks in each building will use the same design and equipment as if the 2 buildings were wired together. By going with a wireless vendor, you will get an entire solution package that fits your exact requirements and is designed for your exact operating environment (and with a single entity for tech support).
Hope this helps.
by joevilla
by joevilla
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending