2 replies

by thumbsup2

The drive you've pictured is a full height drive with the in/out button in a different place than what your case would allow.

The drive in your machine is pictured here (scroll down):

http://www.dell.com/content/products/productdetails.aspx/inspndt_531s?c=us&l=en&s=dhs&cs=19

... which is probably a low profile drive designed especially for the low profile case it's put into. If you click the design tab at the top of that page above, you'll see your machine pictured close up. Look at where the in/out button is placed on the drive.

If you can find the receipt that came with the machine, often the exact make/model of the drive installed is shown on it. However, you're probably going to need to order a replacement from DELL.

This discussion is closed to new replies.