Discussion Locked

"Write to drive C: error"

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
As an OEM of marine computers for the last three years, we have placed many systems to boats that are subject to shock and vibration. We have for this purpose designed a shock mounting system for the 2.5" drives we install to overcome this potential problem. Recently we have had a spate of failures of our systems that create the "write to drive C: error" blue screen. We have used both IBM DJSA-20GN and Hitachi DK23DA drives with fluid ball bearings, with each showing the same failure. We have tried to troubleshoot this problem by removing the shockmounts and by changing the IDE cable style. Can this issue be a product of the systemboard hardware failure or possibly a software design failure?

10 replies

by rapidad

As a former Marine Superintendant for Tidewater Marine, I am familiar witthe problems you face (Viper System). While shock (delta V) may be a major factor, there is also the issue of precession and angular momentum, i.e. when a spinning object is subject to change in axis. Look at whether the drives are now mounted in such a way that the axis is subject to more forces than as previously experienced, and /or if there has been an increase in angular momentum because you are using faster rpm drives or there are more mass as in more platters. The newest technology servers are getting ready to use are virtual drives (IBM Blade Servers) and these will use large memory blocks instead of spinning data storage (a bottle neck at todays ram/cpu/motherboard speeds). At present you can buy a 256meg sony memeory stick (the answer to listening to music while jogging /shock defeated)and the 512 will be out before years end. Maybe a look at leaping ahead of the technology curve would be in order. Howmuch hard drive space does your system need, and can it be replaced with pure memory? Another option is to use smaller drives (less angular mass) ever heard of IBM Micro drives?? There is also the option of sevral small drives in a raid 5 set which would help with data loss. Very interesting problem, hope you get more answers.................You might also want to contact a futurist like John C Dvorak
at PC mag
robert.hanan@ca.com

by rapidad

Very well, then list exactly what changed in the last 3/4 months. there may be an issue with enhanced GMR head writing affected by new/modified software............

by rapidad

Doing a little looking around, why not place chart data on DVD ram, current levels are at almost 8gig a disk and soon to rise well above that. This way a micro drive could handle the binaries of your programs while static data could be in the form of transportable disks. (A market here for harbor and docking pilots). A dvd rpm writer hooked to satelite link could provide downloadable libraries. Are you using boattracks from Qualcomm??

by rapidad

Sorry it been a few years since I used it, Its called boatracs:
In successfully developing solutions for our customers, Boatracs realizes that all marine operators deal with similar requirements ? every boat embarks crewmembers, consumes fuel, reports on activities, produces logs, completes accident reports and monitors maintenance. Yet, no two companies operate and fulfill these requirements in exactly the same manner.

As a result, Boatracs has developed core software modules that fulfill requirements in virtually all areas of marine fleet operations. At the same time, our application software is flexible enough to adjust to the more specific and detailed requirements of individual customers.

Listed below are examples of Boatracs? core software modules that address specific needs of individual boat companies. This software is available in its existing form or it can be customized to fit your specific reporting needs, regardless of which communication equipment terminal you areusing.

Accident & Injury Reporting
Cargo Transactions
Corps of Engineers? Reports
Crew & Payroll
Custom Software
Daily Log
Engineer?s Log
Fuel Reporting
Groceries
Invoicing
Manifesting
Supplies
Tow Diagrams
U.S. Coast Guard Safety Inspection Reports

by rapidad

Like Okona1 says the orientation of rotational axis is critical. the reason being, the way to ruin a $1000.00 seagate 10,000 rpm scsi hot swap drive is to remove it from its cabinet and set it on its side, where it will promptly fall over and the system admin will beat you to death. You can acutally hear the heads bouncing on the disks.

by lamar

Modal testing has been performed on this system for shock and vibration (Vibration:Full Sine in three axes, 1.0 octaves/minute, 6 to 350Hz acceleration held constant at 1.00g, for 20 sweep cycles in each axis. Random: 1.5hr operational @ 10Hz-500Hz (Mil-Std-810D) Sine Sweep:.5 hr @ 1.5mm displacement w/1g acceleration from 18-150Hz (IEC68-2-6) Shock: Non-operational:27g for a duration of 18ms in six axes 1000 shocks per axis half sine Operational:10g for 11ms (IEC68-2-27).
Furthermore, as stated, this anomolie has begun occur only in the last three months, with previous like systems not being effected.
Certainly, solid state drives or smaller platter drives (ie. Micro drive)would be the ultimate answer, but charts and satellite photos for global travelers require many gigs of data storage.
We have although, recently upgraded to a newer version of software that may be requiring higher data access, thus subjecting the drive to a greater potential for failure.

by okona1

Change the orientation of your drives. If they are mounted horizontal inside the case try to mount them vertically. For some of the reasons stated earlier. You may find this simple soloution solves the problem. This fixed similar problemws with the new high capacity drives in computers used in privated airplans and buses.

by lamar

I don't want to believe that orientation of this 2.5" drive is the problem, simply because these drive are supposed to work in any position, but in reviewing the failures, I am finding that none of them occured in the right-side-up horizontal plane. Five occured in an inverted horizontal position, while four have happened in the vertical axis. I have also just confirmed that the latest version of the contour software is much more drive read intensive.
In a couple of these scenerios we have reoriented the computers and changed to the newest version hard drive mounting bracket. But, alas, we used the same drive that had show the error. Could the fact that this drive had this error multiple times create this problem again even if theorigional cause was corrected?

by wlbowers

Have you researched the flash drives lately. Solid State so no heads to beat to death. They have them up to 47gig now.

You could put the high access data on one of these.

http://tinyurl.com/2eezs

Take out any spaces after copy and paste.

Lee

by csmith

When you say many Gigs of data, how many?
Even USB sticks are available in 2 Gig models.
Memory technology is rapidly approaching the point where any mechanical solution (aka HDs) is hopeless.
Regards, Chris

This discussion is closed to new replies.