Discussion Locked

Xp Hangs in the middle of anything

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have XP pro, AMD 800 processor,256 mg ram,System is formatted as NTFS. Since this format, XP hangs at various stages and reboot is neccessary. Could happen at any time and there is no warning.Could this be related to lack of RAM, or might it be a processor problem.

7 replies

by thechas

I don't recall any specific patches for NTSF, but it wouldn't hurt to run Windows Update, and see if anything comes up.

You also might want to update the chipset drivers for your motherboard.

Next, how big is your hard drive?
NTSF can create problems on small hard drives.
Or, if you have limited free disk space, the conversion to ntsf may not have been complete.

Also, make sure that you are not using too small of a paging file.
If you are using a fixed size paging file, I recommend at least 700MB if not 1GB or more.

As I think about it, the paging file may have been corrupted by the file system conversion.
I thought I had an article about repairing a bad page file, but cannot find it at this moment.

Chas

by midofis

I have a WD 20 gig HD, and I just change the page flie to 700. It was at 382, the system chose it. I have update set to run and install on auto, but ran it anyway. It tells me I need SP1 but I have given uop on that and tried XPDITE from the Gibson Web site. I'll see how things go now.

by sgt_shultz

wow Chas, that is some great info. am making notes...thanks.
er, couldn't one refresh the paging file by creating one of zero size, re-booting, then creating a new one? did this once and windows complained but ran enough to do this...if you defrag in between those steps it is a cheater way to create defragged swap file...

This discussion is closed to new replies.