Discussion Locked

XP Pro will NOT install

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an older PC (AMD K6-2 350)that has run XP Pro before. I moved to a bigger hard drive (60 GB Western Digital)and needed a BIOS upgrade to support the larger drive but didn't have access to the upgrade. I used the WD workaround (Yes, I know the WD software doesn't like XP). It worked fine. I finally got the upgrade to my Award BIOS and now I cannot load XP. I have tried both NTFS AND FAT32 file systems. I can load Win98 SE with no problem but XP ALWAYS hangs at various stages of the install. Ideas?

14 replies

by illyad6

I have partitioned the hard drive using both FAT32 and NTFS. I usually cut my drives in 3 pieces: Main or Windows, Programs and Data. However with the 60GB drive perhaps my partitions exceeded a size limit. Thanks for the reply!

by djent

Boot patition size limits as follows: FAT32= 30GB, NTFS=1023 cyl or 7.68GB.

by illyad6

Really, I didn't know that about boot partition sizes. You're saying my WINDOWS partition (I cut my drives in 3 pieces... Main or Windows, Programs and Data.) HAS to be 1023cyl/7.68GB or smaller!?? I'll look into that, but I'm fairly sure I DID try the installation with a FAT32 partition of 10-15GB with no success. Still.... Thanks for the tip!

by mtberjim

I'm running XP with NTFS and it's on a 20gig partition, I also Installed XP on a 40gig partition, 2 days ago. I would check your disk, is it a copy or an original? I've also seen 2000 hang on a video card driver when I was building my server. I swapped the card and it installed fine. Good luck, Jim D.

by rsison

To make it straight Win2k and xp don't have limitation. You could install on the biggest hard drive you can find in the market. I used 120GB without a problem.
With that situation it seems your problem is either on the BIOS or on your hardware. Toisolate the problem it is advisable to install the OS without any card and disable those integrated component such as the sound card, modem, network card. Last but not the least disable the virus detectionsoftware that comes with the motherboard.
Remember keep it simple.
If it still fails .. try another disk if you have that option.

by illyad6

I've put off pulling all the hardware from the box and trying the install that way. I AM using the latest BIOS for my box so I guess that's my next step, the "KISS" approach. The "bitch" is I was running XP on this box for nearly a year... the only thing I did was move to a larger HD. sigh "Here goes..."

Thanks.

by illyad6

Part of the problem I've had figuring this out is that the install seems to hang in a different spot every time.
What did you mean about original disk or copy? I have a copy but I'm quite sure it is legitimate software and I have installed from this CD before on previous incarnations of this particular PC. I've never registered XP, is there a Microsoft timebomb I've missed or something?

by billgates

illyad6:

The product that you are referring to will not install because it is an illegal copy of the software.

I have sent my thugs over to your place of install to properly rectify the situation.

I hope that you have a nice day, and thank you for your support of our incredibly bad Micro$hit software.

Billy Gatez

by thechas

Hi,

Since you are now using an updated BIOS, are the remnants of the WD tools removed from the drive?

The best way, is to use the WD floppy, and follow the sequence for booting from a floppy, then un-install the software.

You can sometimes get rid of these programs by using the /mbr switch from fdisk.
Run fdisk /mbr

It is also possible that either the CD drive is going bad, or that the CD copy of XP is loosing a few bits here and there.

Chas

by illyad6

I haven't tried the fdisk /mbr yet.... but I have swapped out the CD drive and uninstalled the WD software. Hell, I even tried a different copy of XP and tried putting it BACK on the the old drive... in EVERY case the install hangs at one of SEVERAL different stages. I'm gonna strip the hardware down to the bare bones and start over again... S L O W L Y. sigh

by gjkeizer

what for error does the install say?
Mabey the hd wont accept de WD Disk if its Not good in the bios.

by robert_onyuma

may try the other way round,

clear everything

upgrade bios>do not us WD software>install xp

back-up whole, hardisk if you can get another spare, using tools like norton ghost60 or above

remember to boot from a: using dos

it will not "see" your NTFS but ghost will under dos

hope it works

i know 4 sure that if i had access to your pc then no prolem, i think better on site

robert

by illyad6

XP will NOT install on the PC, 1st, 2nd or AT ALL. I've tried FAT32, NTFS, large partitions, small partitions. I've setup the drive with XP utilities, Fdisk, Partition Magic 5.x, I have booted from the XP CD and run setup from within Windows 98se. In EVERY case the XP setup freezes at a variety of points in the install. It has frozen copying files, it has frozen checking the drive, it has frozen starting Windows. I was running XP on this PC with an older 10GB drive AND with the new drive using WD's workaround before I upgraded my BIOS. I am now running Windows98se and ignoring a large portion of my drive I'd partitioned with NTFS... "Hope springs eternal", I guess.

This discussion is closed to new replies.