Question Locked

Ask about Scanner HP G2410

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Please help me..
I have a problem about my scanner HP G2410, I install the scanner in my PC HP Compaq dc5700 Microtower (PN EW287AV), OS Win XP SP2 in my office (Office A). Installation process is ok, I try to scan a paper is ok too. the problem is, I go to other office (Office B) and then I install the same scanner in the same type of PC (HP Compaq dc5700 Microtower, OS Win XP SP2). Installation process is ok but when I try to scan a paper, the scanning result is blank, there is no picture. I re-install the scanner driver, and change the USB port aren't solve the problem. Then I return to my office A, I try to scan a paperbut in there I can see the picture (not blank like in my office B before). It make me confuse.
I have asked this problem to HP Service Center, but they couldn't gave me a solution.
Please help me, and what should I do? Thank you so much.

5 replies

by rob miners

Uninstall the Scanner Drivers through Add/Remove Programs. Disconnect the USB cable for the Scanner to the PC. Restart the PC and reinstall the software and when it asks to connect the Scanner do so.

Help and Support Incorrectly States That Sharing of Scanners is Possible

http://support.microsoft.com/default.aspx?scid=kb;en-us;304097

Let us know how you get on.

by scary_herry

Thank you for your replay.
I have done before, but it didn't help.
I have done the installation step as the manual said, I also tried to use other USB port. Is there any possibility the problem is in the operating system?

by rob miners

remove all of them and the scanner. Then reinstall them with the scanner first.

Go to the Control Panel and click on Add/Remove Programs. Highlight any Printer Software that is listed here. Select Remove.

From the Control Panel, click on Printers & Faxes. Right click the printer in question and select Delete

Look at the Toolbar. Select File, then Server Properties. Look in the Drivers tab. Highlight the printers drivers listed here and click on Remove for each one.

Reboot the PC. Do NOT reconnect the printer!

Go to the website of your printer manufacturer. Look for new XP drivers for your model. Download the correct software.

Run the exe file you just downloaded. It should auto-start the installation program

The software will tell you when to connect the printer.

by oh smeg

Try removing the driver disconnecting the scanner and all devices plugged into any USB Port on that computer.

Reboot and then install the Scanner Driver & Software and when prompted plug in the scanner.

Try it now and see if it works with the Supplied HP Scanning Software.

If it does try plugging in USB Devices one at a time and run a scan after you plug in each USB Device. I think that you'll find that this scanner will not work with one of the USB Devices in use with this computer as there is a conflict between either the 2 USB Devices or you have a Software conflict preventing the Software accepting input from the scanner.

Of course you can also try opening the Scanned Image that has been saved to the HDD as a JPEG in another Program and see what if anything is in the Image.

Col

This discussion is closed to new replies.