Software

Ask something
Discussion Locked

AutoCAD 2000 Errors

0 helpful
2 replies

by shanghai sam

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

I have a Dell Dimension 700 PC running AutoCad 2000 SP1 and SP2. Lately this computer has started to generate errors messages that are causing problems with the program. Does anyone know what the following errors are or how I can go about finding out.

The first error reads "INTERNAL ERROR: !dbobji.cpp@5514: eNotOpenForWrite". The second error reads "Error handler re-entered. Exiting now." The third error reads "FATAL ERROR: Unhandled Access Violation Reading 0x11052 Exceptionat 1c8926e6h"

Any help would be greatly appreciated.

Jeff

2 replies

by astrocat123

i would say you applied the sevice packs wrong. autocad is very picky about where files are try unistall and reinstall if all else fails. autocad likes to have files installed into the right directory using the right file path.you might have had a corrupt down load if you doown loaded the up dates or if you got them directy from autocad on cd the files did not go to the corect directory. back up your work and try reinstalling and pay close atention to directory paths i know this is a hassle but i see no other way. hope this helps

by estebandelatorre

Are you trying to open a file from a readonly media or from a device that has no enought space free available.
Try moving the file other disk
Do you have 300 or more Mb of space free on the c: drive?
The second error may came from the bad close file perhaps after the error 1 arrise.

This discussion is closed to new replies.