Question Locked

Big Trouble

0 helpful
43 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello again.

This time I am in the guano...

This evening the power supply on my computer failed. I had turned off the computer. When I turned it on again - nothing. It so happens that I have a new power supply I bought for the "tarting up" of my old machine. So I installed this and the computer booted up fine; after a while whilst it recognised various devices; all seemed OK except no internet. I tried restarting, set "automatically detect settings" which was unchecked, no good. Drivers all appear to be there and Device Manager says that the Nvidia network bus controller is working properly. So I am now running the "old banger" which fortunately I had not dismantled and obviously I have a connection so the modem is OK.

Help!!

Thanks in advance,

Paul

43 replies

by rob miners

saying that on the startup of the PC it detected new Devices.

Check in Device Manager to see if there are any Devices with a yellow exclamation mark. If there is reinstall the Drivers.

Also check here.

Open Internet Explorer and select Tools make sure that the "work off line" is not ticked. Also go to internet options, connections, Lan settings and make sure that only the 'automatically detect settings' box is ticked. Also make sure that 'never dial a connection has a tick.

by var1016

Hello,

And thanks for your response.

Yes on starting up nothing worked - even the mouse (USB cordless). AFter a short while I got the sounds and stuff started functioning. I then had the two screens symbol in th ebottom RH toolbar with a yellow triangle and then a message telling me I had limited or no connectivity. I rebooted the modem; I unplugged the Ethernet cable and tried the USB one instead - all no good.

I only use IE to download Firefox and sometimes MS updates... I have FF3 istalled - even if Gmail doesn't work properly with it (works fine with FF3 Beta 5).

I will check in Device manager as you suggest - but tomorrow (I have only one monitor and cannot face any more replugging right now.

thanks again & best wishes

Paul

by nepenthe0

1) Uninstall and reinstall IE:

Control Panel > Add/Remove Programs > Add/Remove Windows Components > Internet Explorer

Uncheck IE. Boot the computer. Then reinsert the check in front of IE.

2) Download and install the new Firefox v.3 browser from Mozilla:

http://www.mozilla.com/en-US/firefox/

It's ~35% faster than IE. Firefox seamlessly imports all your IE settings and Favorites list. You can configure the toolbars to nearly match IE if you prefer. I suspect you won't miss IE after you've played around with Firefox.

3) Disconnect the Ethernet cable from the modem. Boot the modem. Reconnect the Ethernet cable.

4) Post back and let us know how you're getting along.

Rick/Portland, OR

by var1016

Thanks Rick,

As I wrote above, I avoid IE and have FF3 installed (though FF3 Beta 5 is better). FF is set as default browser.

I did unplug the ethernet cable and rebooted the modem twice. I also tried the USB alternative connection which didn't even give me the yellow triangle and warning about limited connectivity - just a red X!

I am hoping there isn't a motherboard problem although I suppose that nothing would work if there were?

Best wishes

Paul

by nepenthe0

Since you're using Firefox, check your Internet settings:

Tools > Options > Advanced > Connection >
Configure how Firefox connects to the Internet > Settings > no proxy [dot in radio button]

Any luck?

Rick/Portland, OR

by nepenthe0

Control Panel > Network Connections > LAN (right click) > Properties > General

> There should be a checkmark before Internet Protocol (TCP/IP)
> There should be a checkmark before QoS Packet Scheduler
> Remove check from Client for Microsoft Networks

Post back with results (if any).

Rick/Portand, OR

by var1016

I have tried, but it appears that the modem is "not connected" to the computer. I reinstalled all the Nvidia drivers, checked the things you mentioned. Device manager says that all the Nvidia devices are working properly but I am not inclined to believe it. I have a nasty feeling that the PSU failure has taken out something on the motherboard. I am by no means knowledgeable as is obvious to anyone who has read my posts here, but I cannot see that there could be another explanation. Running IP config in the cmd box, gives limited information compared with this computer (the one that works!) but I suppose that this is because it cannot automatically detect anything because it is effectively disconnected.

I have also tried System Restore!

Thanks again for your help

Paul

by nepenthe0

This is excerpted from:

Robert Cowart, Brian Knittel, [i]Using Windows XP Professional[/i] (Que Publishing, 3rd ed, 2005), ch. 14, p. 493

> Check Event Viewer. Does it show network errors? If Yes, resolve before continuing.

> Does [i]ping 12.7.0.0.1 get replies?[/i] If no, uninstall all network components, reinstall, reconfigure, and try again.

> Does command [i]ipconfig/all[/i] display valid IP and DNS addresses? If no, there is a software configuration problem.

> Can you ping other computers on the LAN by their IP addresses? If no, there are network hardware problems.

> Can you ping the IP address shown as the Gateway Address? If no, the problem is with the gateway. Repair problem there.

> Can you ping address 63.240.93.132 or other valid outside IP address? If no, there is a DNS configuration error.

> If yes, the problem is with the gateway's connection to the Internet.

> Use command [i]tracert desired.host[/i]. Do packets get outside your LAN onto the Internet? If no, there is a problem with the gateway's connection to the Internet.

> If yes, the problem is with the Internet

Hope this diagnostic algorithm helps. I wish I understood all the terms, but you seem to have a solid grasp of this stuff. Post back and let us know how you fare.

Rick/Portland, OR

by var1016

Finally I tried a re-installation of Windows. The symptoms are still the same: apparently no connection.

SO my last shot will be to install a PCI RJ45 network card, in the hope that this will bypass whatever the problem is.

If that doesn't work, then it's a new motherboard (plus inevitably a new box!).

Thanks to all for the help and advice.

Paul

by thumbsup2

Is the network card working in the device manager?

You said "Device Manager says that the Nvidia network bus controller is working properly". Well, the network device and the network bus are two different things.

Do you have any yellow !'s in your device manager?

Personally, I don't understand why, when a power supply is replaced, Windows would be discovering new devices. Are you sure that's all that happened?

Is it possible there's not enough power being supplied from that PS to power all of the components on the MB? Would that cause Windows to discover "new" devices?

by var1016

Thank you.

I am pretty sure that there are no yellow ! in Dev Manager; it was only on the first fire up that Windows discovered various things; now it boots fine and everything works perfectly - except Internet.

The PSU is new and supposed to be 480W which I doubt personally, but the original was rated at 300W and probably a "real" 300W.

I could do with a bottle or two myself!

Thanks

Paul

by var1016

On switching on, once again the computer had to "discover" the USB bus, and the mouse took about three minutes to wake up.

I clicked on everything in Device Manager: no !

I have a new MSI motherboard arriving that was intended for the mods to the old computer; I am now thinking that it will have to go into the new one. Meanwhile the old one is still grinding away: it has a 2GB Pentium IV and 256M of ram - and it is damned slow!

Best wishes

Paul

by var1016

Thanks yet again; I have downloaded the programs and will install them later on the non-communicating computer! I'll give the PSU a proper caning!

Paul

by nepenthe0

A 2GHz processor is plenty capable, and 256MB of RAM is enough to let Windows XP run pretty well if you pare down the load on memory.

The 3 most important reasons for poor performance despite capable hardware are:

1) Antivirus software
2) Windows services
3) Background processes

Antivirus applications are notorious for converting perfectly decent computers into molasses. McAfee and Symantec/Norton are among the worst offenders.

Disable your antivirus program and see if this makes a difference. Uninstall it if my suspicions prove correct. If you feel you absolutely must have antivirus protection, the [i]Avast![/i] freeware has received favorable commentary in this Forum:

http://www.avast.com/

Disable unneeded Windows services. Review Scott Lowe's excellent June'05 TR post:

http://tinyurl.com/yohler

You will need to use judgement, because some of the services that you can disable might actually be useful for what you're doing with the computer. You will find Windows Services at:

Control Panel > Administrative Tools > Services

Right click the service, select Properties, and disable an unneeded service. Those services already set to manual that have not started can be left alone, because they do not automatically load into memory at startup.

Finally, investigate background startup processes, and disable those that you don't need. To determine what processes load at startup, open the Task Manager:

Ctrl-Shft-Esc

and examine the Processes list. Identify the processes at ProcessLibrary.com website:

http://www.processlibrary.com/

If you have access to the command msconfig, you can selectively disable processes that load at startup. If you do not have access to this command, download and install the free antispyware program Spybot Search and Destroy:

http://www.safer-networking.org/en/index.html

Install Spybot. Under the Tools menu, you will see a list of startup processes. Uncheck the ones you wish to disable. This is completely reversible if you change your mind later.

It goes without saying that, before commencing any series of computer configuration tweaks, create a Restore Point in System Restore. That way, should you assassinate an essential startup process, you can recover your computer to a working configuration, and then cautiously retrace your steps.

Rick/Portland, OR

P.S. - Don't forget to run the disk cleaner program and a defragmenter periodically.

by var1016

Thanks for these suggestions: they will no doubt help to keep me on the right side of insanity whilst I solve the problems on the other machine. I have already looked up the motherboard (old computer) and see it can accept up to 2GB SDRAM). Memory is cheap so I might get a couple of 512k cards which should perk it up. I use Avast which I believe to be very good and pretty efficient.

Actually the machine is probably nearly as quick to start as the other one was - and that has 4GB ram and an AMD 5600+ dual core processor. The problems start when trying to multi-task - my photo-editing software is pretty greedy!

Nevertheless I will certainly look at the start-up processes and defrag is always "on the menu.

Best wishes

Paul

by older mycroft

So that when his system trips over and falls on it's face due to having zero antivirus capabilities - he can follow your arduous reclamation regime of habitually rebuilding your virus-riddled system, because it's quicker that way.

Sorry Rick, but you are, like your embedded cartoon above, 49,043 instances of an utter buffoon!! ;)

by older mycroft

I wonder if a dial-up connection will "Fly when properly configured", eh Rick ??

by boxfiddler Hot topic

at 31.2 Kbps to a complete load of Print/View All. The ONLY way to read these threads without spending an entire night trying to read only 3 or 4 threads.

And you can?t reply until TR has finished loading the page. At least not at this speed. Brings up a 404 Page Not Found every time. (Discovered the hard way ? by repeated attempts and repeated receipts of 404!)

Can't get far in an hour at this rate.

by Former member

In "Device manager" delete the "network adapter" that is listed and then re-boot your computer. Also make sure that the internet is switched off for 15 seconds while your computer re-loads on your network adapter and software. Then switch on your network router or modem. This should get the network back up and running.

Please post back if you have any more problems or questions.

by var1016

Hello again and thank you for this suggestion; I shall try it immediately.

Best wishes

Paul

by var1016

Hello again.

I did as you suggested, and uninstalled the NVidia networking controller and rebooted. The computer as you predicted, then discovered the Ethernet device and network devices and said that they were installed and ready to use.
I then booted up the modem, but I'm sorry to say that the result was the same: a message telling me that I have limited or no connectivity.

But thanks again for your suggestion.

Paul

by rob miners

Click on the "START" button and click on "RUN".
Type in "cmd" and click "OK".
A black box will come up on your desktop. In the black box type "ipconfig" and hit "ENTER". The IP Address should be in the format "192.168.xxx.xxx". If your IP Address starts with "169.254", your configuration is not correct or you are not plugged into the Unit correctly.

Recheck the settings on the Modem.
Has DHCP been enabled.

by Former member

For about 30 seconds for the computer and 15 seconds for your router. Switch on your router first then your computer. This should fix your problem.

Please post back if you have any more problems or questions.

by var1016

Yes I have tried this; no change.

Thanks

Paul

by Former member

Go into internet settings and make a new connection. See if that will work. You will get the same trouble because your router/modem is a usb type. You will need to get a Ethernet type router for your computers then you will not get this trouble. Usb's have a tendency to log out now and again because they are powered through the usb cable (some types). Hope this helps you.

Please post back if you have any more problems or questions.

by var1016

Peconet,

I replied to this message but my reply seems to have disappeared!

Anyway, first, I am using an Ethernet connection, not USB. I am not using a router since I have only one computer that connects to the Internet at present - this old one!

The ISP's modem offers Ethernet and USB connections. I have a new USB PCI card that I installed yesterday; later I shall try to set up the modem to work in USB to see if the new card bypasses the problem.

Thanks again

Paul

by var1016

Hello again, and thanks for your continuing efforts to help me; much appreciated.

I have to use the ISP's modem (which works fine with the second computer) because it seems that only with this can I get my free telephone calls. And my new Linksys Modem/Router won't work (it says password problem which is nonsense!) and with this router I cannot have the free phone service anyway.

Now I am waiting for a LAN network card which I hope will bypass the trouble.

Meanwhile I am trying to build another computer...!!

Best wishes

Paul

by var1016

Hello again.

Yes I get 169.254 etc. It also says that DHCP is enabled.

Once again, there is no problem when the modem is plugged, with the same Ethernet lead, into my second computer.

Incidentally I cannot set anything up on the modem; it is a plug and play device supplied by the ISP.

Regards
Paul

by rob miners

Disregard the previous instructions.

< if that is the case you would probably have to install the sofware from the modem. >

Which Modem are we talking about I am starting to get confused?
< Big Typo > < Big Big Typo >

by var1016

Oh dear, sorry this has become confusing. OK I am referring to the ISP's own modem that works with this old computer. The other one (which appears to be useless for my purposes) and which won't work (password allegedly) is the subject of my other question "Modem Stuff" but I am sorry to say that I am guilty of complicating things.

This thread "Big Trouble" refers to the computer which appears to be broken following the PSU failure!

Paul

by Former member

Routers keep the internet connection(s) live by pinging every 5 or so seconds. If you are just connecting straight to the wall socket then the onboard Ethernet socket might disconnect.

Please post back if you have any more problems or questions.

by Former member

Please post back if you have any more problems or questions.

by var1016

It seems that my suspicions were correct: my "el cheapo" LAN card arrived today. I installed it and Hey Presto! Internet.

So obviously when the PSU failed, it took out some element of the onboard LAN system.

Thank you all for your help and advice.

Paul

This discussion is closed to new replies.