BSOD URGENT HELP NEEDED

Question

While gaming on COD4 or COD5, my computer will suddenly just auto-reboot OR it will give me a BSOD. I checked event viewer and it gave me the following:

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 11/20/2008
Time: 1:07:00 PM
User: N/A
Computer: OWNER-7486CD808
Description:
Error code 1000000a, parameter1 00000000, parameter2 000000ff, parameter3 00000000, parameter4 806e4ea0.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 30 2c 20 000000,
0038: 30 30 30 30 30 30 66 66 000000ff
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 38 30 36 65 00, 806e
0050: 34 65 61 30 4ea0

All drivers are up to date on the system. I am running WinXP, Asus M3A mobo, ATI 3870, 4 GB RAM, AMD 6400+. Case is antec 900.

I did a temperature check on the graphics card and it was fine, clocking in around 55 degrees, 60 max.

Any ideas?

tmlfan_99 · Answer

Clarifications

jck · Answer

1) CPU temp...keep it under 55C...always. a sensitive CPU can flake on you

2) case temp...if your memory gets too hot (are you OCed?), it can flake out too.

3) chipset temps...again...OCing can cause them to flake

I doubt that your video cards are causing it.

captbilly1eye · Answer

I would suspect your issue is driver related. Did you recently update your video card driver? If not, are you using the latest driver for it? What about BIOS and chipset driver updates?

tmlfan_99 · Answer

Chipsets are all up to date according to ASUS, I have never updated the BIOS as I do not know how.

tmlfan_99 · Answer

Here are the 4 previous DUMP files

Loading Dump File [C:\WINDOWS\Minidump\Mini112008-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Thu Nov 20 13:05:25.906 2008 (GMT-5)
System Uptime: 0 days 0:15:51.494
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
........................................................................... .............................................................
Loading User Symbols
Loading unloaded module list
....................
*************************************************************************** ****
* *
* Bugcheck Analysis *
* *
*************************************************************************** ****

Use !analyze -v to get detailed debugging information.

BugCheck 1000000A, {0, ff, 0, 806e4ea0}

Unable to load image AmdK8.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AmdK8.sys
*** ERROR: Module load completed but symbols could not be loaded for AmdK8.sys
Probably caused by : hardware ( AmdK8+3552 )

Followup: MachineOwner
---------

Loading Dump File [C:\WINDOWS\Minidump\Mini111908-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Wed Nov 19 19:43:33.703 2008 (GMT-5)
System Uptime: 0 days 5:08:49.431
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
........................................................................... .............................................................
Loading User Symbols
Loading unloaded module list
....................
*************************************************************************** ****
* *
* Bugcheck Analysis *
* *
*************************************************************************** ****

Use !analyze -v to get detailed debugging information.

BugCheck 1000000A, {0, ff, 0, 806e4ea0}

Unable to load image AmdK8.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AmdK8.sys
*** ERROR: Module load completed but symbols could not be loaded for AmdK8.sys
Probably caused by : hardware ( AmdK8+3552 )

Followup: MachineOwner
---------

Loading Dump File [C:\WINDOWS\Minidump\Mini111808-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Tue Nov 18 21:02:31.781 2008 (GMT-5)
System Uptime: 0 days 12:43:35.511
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
........................................................................... ............................................................
Loading User Symbols
Loading unloaded module list
....................................
*************************************************************************** ****
* *
* Bugcheck Analysis *
* *
*************************************************************************** ****

Use !analyze -v to get detailed debugging information.

BugCheck 1000000A, {c6b1ab5d, ff, 1, 806e4ea5}

Unable to load image AmdK8.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AmdK8.sys
*** ERROR: Module load completed but symbols could not be loaded for AmdK8.sys
Probably caused by : hardware ( AmdK8+3552 )

Followup: MachineOwner
---------

Loading Dump File [C:\WINDOWS\Minidump\Mini111608-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Sun Nov 16 15:26:28.062 2008 (GMT-5)
System Uptime: 0 days 6:36:14.772
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
........................................................................... .............................................................
Loading User Symbols
Loading unloaded module list
...............................
*************************************************************************** ****
* *
* Bugcheck Analysis *
* *
*************************************************************************** ****

Use !analyze -v to get detailed debugging information.

BugCheck 1000000A, {0, ff, 0, 806e4ea0}

Unable to load image AmdK8.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for AmdK8.sys
*** ERROR: Module load completed but symbols could not be loaded for AmdK8.sys
Probably caused by : hardware ( AmdK8+3552 )

Followup: MachineOwner
---------

jck · Answer

i'd guess: a) you have a disk drive going b) you have a memory chip bad c) your processor/drive controller is flaky but, that's just a guess. not sure otherwise would keep ur ntoskrnl from loading.

rob miners · Answer

To enable the Cool ?n? Quiet feature on a Windows XP system, you have to change the power scheme. Open the ?Power Options? from the Control Panel. Choose the power scheme ?Minimal Power Management? and click ?OK? to enable Cool ?n? Quiet.

1. Click on Start, and open up the Control Panel. Click on Performance and Maintenance, andthen click System.
2. Under General, if the displayed clock frequency is approximately 800 MHz, Cool ?n? Quiet is enabled and functioning correctly.

See if you can disable it by changing the power scheme to Home/desktop

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D

7 replies

Trending Software posts

Icons, favicons and merch graphics on Squarespace: my workflow for getting

Is CRM software becoming too complicated for small businesses

How Are Teams Testing AI-Generated Code Before Production?

Network Printer Works for Everyone Except Me

Can I Print Emails Directly from a PST File