Question Locked

Can Exch 5.5 on NT4 sp6i run in a 2003 Native Mode AD domain

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a client running Exch 5.5 on NT4 which is servicing several small NT domains. I have upgraded the root domain to 2003 Mixed mode AD
removed all the NT DC's and set to upgrade the AD domain level. I Also have Installed Exch 03 into the Exchange org, setup ADC, all agreements everything works fine. I want to raise the level to use ADMT to migrate the other small domains into this one.
So the question is, "Will the Exchange 5.5 on the NT4 Box (Member Svr) still run OK after I raise the level of the 2003 AD domain to native ?" I have seen that I should upgrade the NT4 to 2000, but will soon retire the NT & Exch 5.5 and don't want to go through that unless required. Thanks !

6 replies

by cg it

native mode W2003 means that only W2000 or better and then if you want a W2000 DC you have to prep it.

Mixed mode will allow pre Windows 2000.

by jeffl

I do NOT mean Exchange in Native mode. But Active Directory 2003 in Native mode. The NT that runs exchange is a member server, not a DC or ever going to be a DC. Sorry if the question was not clear

by cg it

running Exchange 5.5 might work I don't think so .. but maybe theres some hacks that will let an NT box and 5.5 exchange work in a Native mode W2003 environment.

I've never tried it.

by jeffl

Well, thanks for the input, but I tried it in my "Test Lab" and Exchange 5.5 does indeed work on NT4 in a Native mode Windows 2003 Domain. No hacks, just updated the PDC of the old domain to AD, then raised the level of AD to native, tested, rebooted tested again. It works.

by cg it

everyting in the documentation says that Exchange 5.5 and NT, no matter what SP level shouldn't work in a W2003 native mode domain.

This discussion is closed to new replies.