Software

Ask something
Question Locked

Connecting two sites by leased lined

0 helpful
4 replies

by nqobile.mtshali

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have two office sites that are linked by a leased line. How do i ensure that they connecte and share resources across both office and be able to connect to the internet.

4 replies

by mahesh

You can create a tunnel between 2 site on router interface and it will ensure both connected at all time. If you are using cisco router you can get help on cisco.com

Rgds /Mahesh

by alashhar

i think the tunnel is used when the line between the two networks is shared with others.
but the leased line means dedicated line.

by alashhar

your question is not in details. Anyway each site should be different subnet, therefor two gateways or routers installed at the edge of your networks.

(1)from any router , try to ping the other router, if there is a reply that means the leased line is connecting your networks.

(2) try to configure the default gateway, which is IP address of the network router, of a host. after that try to ping any host at other network.

This discussion is closed to new replies.