Discussion Locked

cpu fan running but no lights and want power up

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Cleaned out my computer last night just takeing off the fans and blowing out the heat sink not removeing it and cleaned it up really good but now when i plug up the power to the back the cpu fan comes on but no lights when u push the power up button dont know what i did wrong have cleaned it out tons of time never had this problem so if anyone out there that can help my email adress is ellric1@yahoo.comn

1 reply

by the ancient wanderer

I would take everything out, including the mainboard and the processor, clean the contacts and put them back in. If you need to save time, check the cpu first. Remove the cooling kit carefully, then the cpu. Check and clean any dust and put them back in.
If the problem persists, do the same with the memory modules. Remove them, clean the contacts and put them back in. Also check if there is any metal object between the mainboard and the chassis.
Hope this helps.

--------------

World IT Pros

http://itpros.forumotion.com

This discussion is closed to new replies.