Question Locked

Different LAN settings for different Logins

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have specific LAN settings to connect laptop with office network. Where as in home, I have different settings. Everyday, I have to change them in office & in home.

Is there a way through which I can have dual LAN settings for a single network card that should be dependent on my Login. I mean If I login to my office domain; I should get 192.x.x.x; and If I login on my own PC then I should have 192.y.y.y.

10 replies

by tariq.umair

Thanks for your reply.
I am using win 2003 server. I guess that article is only for win xp. But I will try that as well. If you have any other solution, let me know please.
thanks

by tariq.umair

The solution is stil not working. I tried the solution as mentioned in the article but still i have to disable the office settings to connect my notebook to home network. The connection seemed to be Ok but still I was not able to browse so I had to change the settings. Then after that it went well.

I have static IP with DNS in my office setup & in home I have a router with built-in DHCP and it allocates the IP to machine on runtime. So everyday I have to change the settings to connect to network either at home or at work. I am using Win server 2003.

Any other solution for handling the dual connection ?

by rob miners

turning your PC on at home it should get the IP Address from your Router. When you get to work and turn it on it won't find a DHCP Address and should use the Static IP Address.

by tariq.umair

well since I have given a static IP to PC so it will not get the new IP from router. So limited connectivity will be the answer. I will have to disable the office settings and then it will work fine.

If I go as per the article and add another IP (which is to be assigned by router), It will show the connection but still it will not be able to browse. Thats the problem.

by tariq.umair

Well I had dual settings and it worked. But I felt that the browsing/downloading was not that fast as compared to that of my normal settings.

I felt that my PC has to search every time for the right gateway from where it can start communication. It was bit slow then I have to disable the dual settings and enabled my home settings. It then worked in a normal way.

by rob miners

your decision as to what you do. I have offered you a way to make it work and it was successful, unfortunately it lacked the speed that you require. ;)

This discussion is closed to new replies.