The files you downloaded are drivers. There is no setup application included with them. The original CD that came with the printer would have had it, along with a user manual and instructions on how to remove the printer. If you don't have that CD, the instructions with the driver download on the HP web site says:
[i]hp color inkjet cp1160 series printer software version 4.3 for Windows 2000 and Windows XP- ADD PRINTER system.
Description:
For Windows 2000 and Windows XP
USB (Plug & Play) install :
1. Before you download the driver from the web, create a new directory on your hard drive, c:\temp1.
2. Download the driver to the newly created c:\temp1 folder.
3. Open the c:\temp1 folder and double-click the "exe" file you just downloaded. This will extract the files and expand showing a directory named "cp1160".
4. Connect the interface cable from your hp cp1160 printer to your computer.
5. [b]A "Found New Hardware Wizard" dialog box will appear.[/b]
6. Click next.
7. Select "Search for a suitable driver for my device" and click next.
8. Select "Specify a location" and click next.
9. Click Browse?
10. Go to the c:\temp1\cp1160\Win2k_xp folder and click OK.
11. Select the HPF1160K.INF and click open.
12. Click OK, and then click next.
13. [b]Windows will now [u]install[/u] the driver files. [/b]
14. In the "Completing the Found New Hardware Wizard" dialog box, click Finish. [/i]
---
THAT is the installation for this particular printer which must be run when you don't have the CD that came with the printer. The CD simply automates this process so that when you plug the printer in, the Found New Hardware Wizard knows where to look for the drivers. You can't just simply try to run rundll32 and think that it's going to do the job for you. Every printer has an installation routine, even if that routine is to run the Found New Hardware Wizard and manually search for the drivers.
---