error signature
lOKKING FOR WHAT MIGHT BE CAUSING THIS ERROR MESSAGE. THE CPU REBOOTS AND THEN GIVES THE BELOW MESSAGE
error signature
BCCODE: 40000080 BCP1: 8980F4B8: 88FCC9BB BCP3: BA4DFBB8
BCP4: 00000001 OSVER: 5_1_2600 SP:2_0 PRODUCT 256_1
Software
lOKKING FOR WHAT MIGHT BE CAUSING THIS ERROR MESSAGE. THE CPU REBOOTS AND THEN GIVES THE BELOW MESSAGE
error signature
BCCODE: 40000080 BCP1: 8980F4B8: 88FCC9BB BCP3: BA4DFBB8
BCP4: 00000001 OSVER: 5_1_2600 SP:2_0 PRODUCT 256_1
by kat dadio Accepted solution
by Former member Accepted solution
Find out your network interface driver (nic), and download the 32bit version, load this on.
If you can not, because your computer keeps on booting, then do this:
Repair and install.
If XP is corrupted to the point where none of the previous solutions get it to boot,
you can do a Repair Install that might work as well as keep the current settings.
Make sure you have your valid WindowsXP key.
The whole process takes about half an hour depending on your computer
If you are being prompted for the administrator's password, you need to choose the 2nd repair option, not the first.
1.Insert and boot from your WindowsXP CD
2.At the second R=Repair option, press the R key
3.This will start the repair
4.Press F8 for I Agree at the Licensing Agreement
5.Press R when the directory where WindowsXP is installed is shown. Typically this is C:\WINDOWS
6.It will then check the C: drive and start copying files
7.It will automatically reboot when needed. Keep the CD in the drive.
8.You will then see the graphic part of the repair that is like during a normal install of XP (Collecting Information, Dynamic Update, Preparing Installation, Installing Windows, Finalizing Installation)
9.When prompted, click on the Next button
10.When prompted, enter your XP key
11.Normally you will want to keep the same Workgroup or Domain name
12.The computer will reboot
13.Then you will have the same screens as a normal XP Install
14.Activate if you want (usually a good idea)
15.Register if you want (but not necessary)
16.Finish
17.At this point you should be able to log in with any existing accounts.
Please post back if you have any more problems or questions.
This discussion is closed to new replies.
Sort by Trending