Software

Ask something
Discussion Locked

Exchange Server 5.5 problem

0 helpful
3 replies

by robotech 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I administer a multisite network using the 192.168.x.x class B address.
Our Exchange 5.5 server is located on the 192.168.0.0 network. Users on the same network receive their internal e-mail immediately, but users at the remote sites have started receiving their e-mail between 30 minutes to one hour later.

I have checked everything including our Cisco 2620 whose IOS I upgraded and nothing has helped.
The other sites are connected by frame relay, and the netoworks are:

192.168.1.0
192.168.2.0
192.168.3.0
192.168.4.0
192.168.5.0

Thanks

3 replies

by tumtum73

You mentioned that you have a multisite network, by that I assume you mean multiple physical locations connected via Frame Relay. Do you also have Exchange servers at each site, or do they all connect through the Frame Relay to your one server at a main site?

If they all connect to a main server, I would check to ensure they are not using an offline store. If they are that might explain why they only get their mail every 30 minutes or so, because whoever setup the offline store set it to work offline and connect every 30 minutes.

Steve

by robotech

Nothing was changed. It's one Exchange server sitting on the 192.168.0.0 network. I just started getting reports one day that people's e-mail were arriving late. I can't figure out why all of a sudden the remote nodes would start having this problem, and those on the same network as the Exchange 5.5 Server not have it.

Weird I say.

This discussion is closed to new replies.