Discussion Locked

Gateway Computers

0 helpful
39 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am the manage for a helpdesk that has about 2000 users that we support. We have a mix of systems out in the field at this time but the IMD Chief has decided that he wishes to standardize the systems to Gateway desktops. Can anyone give any info on the cost of support on these systems and rather or not this is a good choice...

39 replies

by jdmercha

I do beleive that Gateway builds a good machine for the price, but their tech support is horrible. I would not buy them for a corporate environment. Especialy after I have fixed so many for freinds, after Gateway's tech support messed them up.

by sitizn wille

I think gateway builds a good machine for the money. We talk with our sales rep for the region and he/she quotes us a price and we normally barter with them a little and get the price down some more, or perhaps free shipping. They are easy to deal with and always give really good deals. As far as tech support, it is loads better than dells tech support. Have never had any trouble. Get replacement parts shipped overnight, and they have even replace drives that were already out of warranty. IMHO a good company definitely worth checking out.
If in a corp environment, you have more room to finalize a price.
SW

by afram

Standardizing on machines is a good idea.

I've heard lots of complaints about Gateway's tech support. I don't think I've seen gateways used in a business before. Usually Dell or HP/Compaq.

I prefer DELL...their machines are decently priced and they always offered a nice discount when buying 5 computers at once. Never had a complaint about their tech support either.

by rboyer

I used to buy everything Gateway. The sales service was fairly good. But, I have had more problems with getting replacement parts shipped than with any other company. Gateway used to have the best support, but if I have a video card go out and it takes 3 weeks to get it, then it is unacceptable. Dell or HP on the other hand offers next day support. It really makes a difference. Check with your Gateway sales person and make sure they offer this. If they don't, you could be waiting a long time for replacement parts.

by jaqui

dell support is the worst I have dealt with.
case in point.
needed to replace floppy drive for dell laptop.
dell usa supports laptop, dell canada doesn't
dell usa will NOT ship part to me as dell canada is where I need to go.
Dell Canada won't get the part as they don't support the model.

laptop is in the garbage now, entire system fried.

by ni70

I prefer Dell over Gateway, Sony, IBM, and Compaq/HP. I've worked with computers from all of those manufacturers. I actually cut my teeth (so to speak) on Dell machines in 1998. I've really never had any major problems with hardware failures, but occasionally a HDD or mobo will fail, as with all computers. I'd say their tech support is by far better than Gateways! I haven't contacted any of the other's though. I usually use their websites for that. I've even noticed that Dell's website is by far easier to navigate through for tech support!

by tbragsda

.
I personally buy Compaq/HP. Worked in Dell, HP, Compaq, IBM companies, and I got to say, there all about the same. Sure you can find differences, something to differentiate them, but workstations are about as vanilla as cubical walls, "what color do you want?".

The good news is that they want to standardize. That's something to really push for. It will save time, money and make your desktop tech happy. Get whomever you choose to provide model life cycle information. It will help with purchasing and knowing when to plan upgrades. Get them to ship new models for you to build/test images etc. Two thousand desktops is enough to put you in a good place to bargain. Not just on price, but support etc. Saveing a buck or two per wks may be not be the reason to choose one over another.

by jessie

LONG time ago, I worked for Gateway in their Tech support, and at THAT time, they trained their techs quite well, but their hold times were HIDEOUS (we're talking 4 hours of hold musak)... in the past several years, seems they've gone the other route... hold times are good... but techs are hideous... I know that they do have different teams for home pc and corporate pc and the corp pc techs tend to be better trained than the home pc techs...

Honestly, I've been on the tech-side at Gateway, and on the consumer side with IBM and Dell... and they're all the same... you get good techs on occassion, but for the most part, the good techs move higher up the food chain... and the moron's keep their jobs on the phone because it's the best they can do...

by skywavebe

Unlike 45 minute wait times from Dell, Gateway let me talk to a live person who spoke english and was very knowledgeable and even spent time with a problem that was not their concern. I have seen their parts are not specialized and the machines are easy to fix in general. I have called them 3 times in the past few years and in each occasion I waited about 3 to 4 minutes. They are lightyears ahead of HP, Compaq, and don't even mention Dell. That is why I have built my own computers (57 so far) using AMD chips and Epox boards- way ahead of any other consumer product. if I had to buy a computer pre-made it would be Gateway.
Broadcast Engineer,

by jrslyrics

Want a good system that will not only standardize but also allow you to lower power consumption by riding yourself of those CRT's, go with the Dell SX280. You can get a great price on them. We paid about $1000 per unitl and they all came with 15" Flat panels they even threw in a few 17" ones! I'll gie you a great contact if you like!

by oz_media

My experience has been with removing all the Gateway's from an office and installing IBM or HP/Compaq desktops and laptops.

Gateways have always, in my experience, been made with low end left over or clearance parts from various manufacturers. The support staff is dim at best. Although you wont find them in retail stores, IBM, Compaq/HP build a better box and offer a 5 year/onsite warranty on professional workstations too.
You can't buy find them at too many retail outlets and need to find a proper computer reseller and you will get a whole host of new offerings. Check thier respective websites for recommended local dealers.

Although your current choice is probably the cheapest, in the long run it generally works out as the most expensive though, downtime and failed parts that aren't replaced the same day cost companies money!

Other manufacturers I have mentioned will respond to your site in 24 hours IF the product fails to begin with, which in my experience with HUNDREDS of them of different makes and models is rare in comparisson to Gateway's.

I would almost recommend Dell over Gateway, and to me Dells are just cheap, low end garbage boxes for the company that doesn't have any money to buy real PC's. I suppose I am spolied in that anyone I have worked for has given me open choice to order the PC I want from who I want, you get some MEAN desktops that way! But even for cost savings, I wouldn't place cheap equipment in a business when it is the heart of the company.

Tell your boss you'll gladly set up a Gateway shop but need a raise in order to take on the added challenge too.

by jaqui

and future shop for hp/compaq

ibm decided to go online only and closed all retail outlets.

some retailers are authorised resellers but not many.

by oz_media

That's my whole point, you couldn't walk into London Drugs and buy a Compaq EVOD300 or 500.

You can't buy A Deskpro EN, EX or EXP from FutureShop.

As you probably know, Future Shop was bought by Best Buy US in 2001. Best Buy carries the really low end and no name products, loss leaders, one off builds and perhaps one or two familiar models just to put consumers at ease, Future Shop is the middle end market.

But you won't find an HP/Compaq Desktop with a 3 or 5 year onsite service warranty at Future Shop, they are simply not that sort of dealer. The margin on such boxes is too low for a retail outlet. They would never be able to make any money selling high-end, quality computers.

Take a look at professional desktops and workstations on the HP/Compaq site, then visit Futureshop.ca and see how many they stock. 0.

by jaqui

I would never standardise with any system that has anything proprietary in it.
be it hardware or software. ( bios most notably )

splash screens from bios advertising manufacturer ( brander ) of hardware is nothing but an irritation.

and any proprietary hardware means you are paying more for no real gain, other than name. ( IBM and ram, all apple systems )

by awfernald

However, you should first pretty much dedicate someone for at least a few months to doing "relationship management" with Gateway.

Establish the relationship to start whereby YOU are the client, YOU make the decisions, and YOU must be kept happy.

With 2000+ units, any computer vendor will be more than happy to have you as their client, assuming that you purchase/replace 500 units/year (4 year replacement lifecycle).

I became sort of the defacto point of contact between my company and Gateway (we had ~1200 units) when our head of operations made the same decision, and it took many hours of yelling, screaming, blackmailing, etc... before we got their delivery time down to an acceptable level, and got them to provide better QC on their product, however, once we got those issues out of the way (they started doing more extensive testing, started "pre-preparing" our systems once we even hinted of an order, etc...), it became a fairly simple process.

However, the biggest problem we had was just getting them to recognize that we, the client, had choice in what we purchased, and that if they couldn't meet our requirements, then we had other places we could go.

As far as replacement parts, simply make sure that you have an ample supply of "spare" computers on hand, preconfigured and ready to go. I apply this to all brands of computers, not simply Gateway.

If a HDD goes bad, video card, etc.... simply swap out the bad computer with a good computer, update documents, and user goes back to work. Then it doesn't matter whether the replacement component takes 1 day or 3 weeks to arrive.

by jdclyde

IBM has really come around in the last decade.

First, they are for WORK. Not a bunch of home systems thrown into an office.

They standardize their lines for several months at a time so if two months later you need more, the only thing that might have changed would be the processor or amount of memory. Things that would not stop a standard ghost image from loading on EVERYTHING.

Standard, you can feed updates without having to purchase third-party software.

Laptops can be ghosted without even taking them out of the boxes, for crying out loud.

I would look into them.

That is what we have for all of our servers and only had a problem with one and they had someone on-site replacing ALL the bad parts. Motherboard and one hard drive puked. Out of 7 servers, all running at least three drives, over five years I would say that is good.

*****
Little breakdown, and handled QUICKLY when/if there is a problem.

by oz_media

I have two many IBM success stories with service, they are so customer focused it's great.

The slightest problem and they have someone showing up with new parts withing 40 hours. Replaced and working everytime no questions asked, just s smile, a new part and "is there anything else I can do for you while I'm here?" Well as it turns out, they don't do laundry.

by jdclyde

Everytime a computer goes down, not only do you have to take the time to fix it, but that users that NEEDS that computer to do their job loses productive time. This time adds up fast.

And of course, if they break a lot or takes a long time to fix the one that gets the blame is the tech that brought the boxes in and supports them, not the vendor.

It is ALWAYS worth going with a dependable business vendor that is at least CLOSE to the same price. Yes you can get a CHEAPER computer for less, but not a better computer for less.

Your reputation is on the line everytime YOU bring a product through that door.

by thechas

Just a side note here.

I would not consider moving to IBM PCs right now.

They just sold their PC business to a PC manufacture in China.

Until we know what the new company is going to do with the product, I would be very cautious about buying them for a business.

As I recall, the new company will be using the IBM name for several years.

My point is, just because the label says IBM does not mean that a new PC will be what you are used to getting.

Chas

by oz_media

Chas, I thought about that but damn, they are just soooo nice. I don't see it really going downhill for business desktops though, the R&D alone is worth it's weight in gold. The website is great for updates and stuff too.

I still think (hope and pray) that it will all remain truly IBM.

by house

Support was my main concern regarding the move and sale of their PC unit. I wouldn't know what else to roll out though. What would you roll out?

by jdclyde

Couldn't pop up when you have something that is GOOD news?

Learning that the last of the BUSINESS machines MAY be going away is a distressing thought.

Don't make me go to Worst Buy to get my computers, please please please.

And don't make me talk to Akmed everytime there is a problem.

by jamesrl

None of them sold the corporate line. For that you have to go to a value added reseller. Someone like GE or Compugen etc. Both provide great service.

James

by jaqui

for professional desktops I would more likely go to The Rock Computers ( Royal Oak and Kingsway in Burnaby )
my point was that future shop and radio shack both sell hp/compaq ystems, which is a fairly good reason to not buy hp/compaq. ;-)

I wouldn't buy them for the simple reason of bios spalsh that advertises the company, concealing all bios posting data. I detest all companies that conceal data during bootup. I want to see what is happening, what devices are configured, what devices may have errored, what services are being started and if the are successfull or not.

not have some splash screen hiding this data from me. by the time the system has booted I know it is all up properly or what isn't working and am already starting to concider what may have gone wrong.

by oz_media

You couldn't pay me enough to recommend buying an HP Compaq box from a retail outlet.
THese 'Home User" pc's are just that, HOME user pc's. In the same sense that XP and AOL literally take over your computer and full it with pretty animations and sounds, and yes, those icky logon screens, this is not so for the professional models.

The pro models have more testing and R&D in them. THye come with professional versions of the operating systems, they come with high speed SCSI drives, 800Mhz front side bus, better motherboards and chipsets, better graphics chip integration (or VERY high end graphics cards, like the NVidea XF series cards), they DON'T have more than a quick ID screen then they boot through the complete POST right in front of your eyes. The best part, 3-5 years,onsite next business day service and 24/7 phone support with actual traned techs, like most tier 2 and 3 techs/engineers elsewhere.

There is a HUUUUUUGE difference, the two sides of the business are completely independant. I was disgusted to see Compaq in Future Shop, and personally I have always preferred Compaq for business over HP so I even have a bias against HP.

I suggest you should try curb your'distribution' bias and give a Compaq a whirl one day, your tech support life is much easier.

by oz_media

Toronto based Ainsworth is who I have used for years. THey have great tech support alliances, they were originally into Electrical Engineering for large complicated building installations. They then entered the network support industry.

Their alliance with TOP tech providers and manufacturers are excellent. It alows them to provide a level of service like no other.

Next time you're out for a quote, you should give them a shout to see what they offer.
Catherine 1-800-263-1737 Ext. 6539

by tglandon

Over the past 2.5 years I have serviced 250 Gateway computers and found them to be a good stable machine... Tech Support has been good. Because of all the machines being from Gateway we have saved downtime for the end user. I recommend them.

by house

In my opinion, standards are very important in maintaining the continuity of the corporate flow. If a box goes down... swap it out... total time = less than an hour in response to the issue.

You want to set up a contract with a company who is on top of the pile when it comes to support. I don't know much about Gateway, but when it comes to support, IBM is my choice.

by oz_media

The Mpro's are pretty nice for the 2-3K range, VERY high end custom coded NVidea cards and a tightly engineed BIOS and FSB clock for Auto Cad, graphics rendering etc.

I love my Thinkpad though!

by house

I don't think that anyone wants to roll out 2-3k machines, but those are nice boxes.

You and your thinkpad... I'm still dying to get my hands on a Thinkpad. Best laptop ever made, but you already know that. :)

by av .

I've used Gateway for about 10 years now. Their hardware is good only if you build your own computer and pick the components instead of buying one of their pre-configured systems. That way, everything down to the NIC card is standardized.

They always offered the lowest price for systems when compared to IBM, Compaq/HP or Dell and they offer discounts for businesses. The trick with Gateway is to custom configure, only buy from their business side and only use their business tech support.

Things have changed now at Gateway since their merger with E-Machines. Maybe its transitional, but I will never buy another PC from them if they don't provide the same service as they used to. Even their business tech support is now horrible. I used to get replacement parts within 3 days, now it takes 20 phone calls and 2 months. I think they recently outsourced their tech support to India, Africa and other countries.

Fortunately, over a 10 year period I can say hardware breakdowns were rare. An occasional hard disk or monitor, never a motherboard. Prior to Gateway, we used to purchase Dell. Every one of them died within a 5 year period for various reasons.

Gateway's biggest problem has always been that they don't have the business name recognition of HP or IBM. If you work with them the right way, you can get a great deal.

I can't say though I would recommend them now unless they become more like they used to be. I think they have become more like e-machines. Cheap boxes, lousy support.

by oz_media

At one company I worked for, it was a PUSH to justify spending more money.

After a short while there they asked me for a workstation quote, so I got one from a reputable dealer in Toronto that I like. The next day we got a new computer dropped off, from Future Shop. Hey it was $350.00 cheaper and the boss got AirMiles rewards too!

Within 20 minutes I had removed the Office Connect Home networking card (ARRRRGH!) removed the operating system and reformatted the hard drive and replaced it with Win98SE (it was a while ago okay! It came with ME)I managed to get it to take the Netware Client and see the network and was off to the races. Within 6 months, it had been moved and left on an empty desk, where it sat for a few more where it was used for burning junk onto CD's (music, photos and family crap) by anyone in the office.

The next time computers were needed (which was just weeks after the cheapo box was bought) my case was pretty solid for investing in actual business machines. The cool part was as someone new came to the office I would shuffle all the computers,including mine, along the line (hand-me-downs) and get a new one for myself instead. This way I ALWAYS had the latest, fastest and most robust machines on the marketand my job was that much easier.

by jaqui

I shocked the sales rep at The Rock the first time I went in.

I didn't want them to pre-assemble, or install any software or hardware.

I do all that myself.

by oz_media

That's what I was getting at, once I made the case for buying the RIGHT boxes for the job (and then some) they had no problem spewing forth 2500 to 3K a box, even for part time sales reps. Lets just say, it was nice for me. :)

When I was remote admin at my home last couple of years, I had customers BOTH buy me VERY high end boxes for logging in and monitoring theri systems repairing user desktops etc.

One had a $900.00 GPU for Graphics (I did a lot of print work for them) which just FLEW through high detail games of Ghost Recon and SOF with ease.

It just takes patience and you can pick the right company almost every time. They are out there but you have to find them, they don't usually need to come looking.

by jordanwaggoner

After the HP/Compaq merger - who's original business line PC's did they use? Compaq's of course. Same with there servers. The Complaq Proliant line is now the HP Proliant line.

On the other side of the coin - who's POS PC did they use for there home market? The HP Pavillion. Oh, it might say Compaq, but its a Pavillion inside.
Biggest waste of electronic circuits I've ever seen...

by jaqui

if the us government allows the sale ( they are concerned about industrial espionage )

ibm has great support, but, as a recent q in the q&a
shows, their bios is not clear.

boot error 1962 means......

( I went to thier site and looked it up, it's a hard drive failure of some sort )

but why can't they use a bios that shows in plain text instad of obscure codes what is happening?

this is a good example of why the proprietary hardware/software is NOT something to be supported

by oz_media

Boot error 1962 means.....

then (I went to their site and looked it up, it's a hard drive failure or soemthing).

Well you receved an error message due to their BIOS and SMART boot 'option' that automatically runs an IBM diagnosic on start. Many of these hard drive errors are found LONG before a normal post would show it ias failed, IBM will show such errors LONG before the drive is dead inmost cases.

Now as for support, the poster got an error and tried to resolve it? Why? Old PC no longer under warranty?

Turn off the IBM boot diagnostic, and uninstal the system maintenance software they provide. Now you will get a new error, perhaps a week or a month from now and find you hard drive is completely dead.

The idea is, IBM's boot catches it IN TIME. You then place that toll free call, they ask you to run a diagnostic, from the built-in partition, and if the error code shows up, they have a tech onsite the next dya to fix it, replace the drive abd remirror etc.

Why should YOU support what is supported?

Even if you DID have to support it, how long did it take to look it up on IBM's site? 5 minutes?

Again, his is a preemptive warning, not a dead drive warning. It could relate to a different or failing part too.

Are you saying you WANT more work to do?

This discussion is closed to new replies.