10 replies
by yogi_bear_2k2 Accepted solution
by clarkd038 Accepted solution
it doens't sound like you need a new graphics card, when you reformatted the drive, did you reinstall windows from scratch?
It sounds as if it may have a virus or a corrupt program slowing it down.
by ic-it Accepted solution
to review the applications and services that load at startup. This can be accomplished with the built-in tool (Start - Run - MSConfig) or with a third party application. Spybot S&D - advanced mode - tools - startup.
You can safely remove most applications and updaters that have no need to run at startup, use Google to learn what some of the exe and dll files are.
by older mycroft Accepted solution
If you've got more than half-a-dozen you've probably got too many.
Check your startup routines to see how many programs are launching at boot-time.
Start > Run > type [u]msconfig[/u] and check the TAB for 'Startup'.
Startup time is mainly occupied loading all the boot-time programs. Load fewer programs ~ get a faster Startup.
by oh smeg Accepted solution
Steals CPU Cycles and System RAM to generate Video so for a reasonable Spec Computer you are reducing the possible performance of the unit when you rely on On Board Video as it is at best the second best option with slow CPU and Video RAM Speeds as the Graphic Processing Units and Video RAM are considerably faster than normal CPU's and System RAM. So you are getting the worst of everything possible with On Board Video unless of course you have a NB then you don't have any choice.
If you want faster performance you need a video card as even the smallest one comes with 128 MEG of Video RAM and you would be flat out having any more than 64 MEG of System TAM available for the Video Out put.
A basic PCI Express Video Cards costs $69.00 AU and has 256 MEG of DDR2 Video RAM on a ATI 3450 Chip Set which makes the Video Card far Superior to anything that is possible to fit On Board.
As for the On Board Video this will be fine for what you are saying you want to do but it will slow down the computer. If you want to have better performance you need a Plug In Video Card to stop your Clock Cycles being wasted doing a job that is best done by the correct hardware.
Col
by ankit_niitian Accepted solution
by yogi_bear_2k2 Accepted solution
by captbilly1eye Accepted solution
Perhaps this article will help:
http://tinyurl.com/5q7fc9
or this one on Services that can be disabled in Windows XP:
http://tinyurl.com/65ynta
Since many have tried to help:
It is greatly appreciated if you tag all useful responses as 'Helpful' by opening those posts and clicking the 'Mark Helpful' button at the bottom. That way, people with a similar situation in the future will be able to quickly see what ultimately helped. Thanks.
by mtarggart Accepted solution
a bad hard drive or even bad memory. I have seen this many times when the computer takes a long time to boot, it is usually a bad hard drive. You can test it using the free tool from Hitachi Global Storage. It is located at
http://www.hitachigst.com/hdd/support/download.htm
It is called Drive Fitness Test. It will test any IDE or SATA Hard drive and even some SCSI drive depending on the controller used. The current version is 4.14. I use this on a daily basis when working on computers.
Download the ISO and burn it using Nero or another burning utility to create a bootable CD. When you go through the prompts (you can use the mouse or keyboard hot keys) choose Advanced and let the program scan the drive. It can take a long time with bigger drives (usually 15-20 minutes with 80GB drives.) If it comes back with a green screen then the drive is good. If it comes back with a red screen, then the drive is bad.
If it comes back with a red screen and your hard drive is a Hitachi Drive, you can perform other tasks to try and correct the problem. These additional tasks are only available for Hitachi manufactured drives, but the scanning should work with all manufacturer's drives.
I use an HP dx5150 with an AMD Athlon64 3200+ single core processor and 2GB of ram with onboard graphics at work and since installing SP3 it does take a little longer to load Windows, but usually just over a minute at startup. Of course Symantec Antivirus v10 Corp Ed always wants to do a startup scan when coming up from a hard or cold boot which takes a lot of processing cycles . If you don't need Ghost to run at startup, I would disable it.
For memory, I use Memtest86+ v1.70 although v2.01 is out now and is located at
Again, download and burn the ISO for a bootable CD. Just boot to it and let it run. If you are using ECC memory, there is an option to change this, but most of the time, you don't need to do anything.
Hope this helps not only you, but others as well.
by oh smeg Accepted solution
And where are they fitted?
BIOS can not be corrupt because it is booting if it was corrupt you wouldn't get to the POST Screen let alone the First Windows Screen.
But it may be incorrectly set which is slowing down the system considerably. Open the BIOS and set it to Performance Defaults then check the Date & Time are correct, when you have finished this Save the changes on Exit and allow the system to restart and see if there is any difference.
Also while you are at things look at the RAM you have fitted. If you have more than 1 Stick of RAM pull both out look at them and make sure that they are identical in brand size and speed. You have a Dual Chanel M'Board here and to use Dual Chanel RAM you need at least 2 identical Sticks in the Color Coded RAM Sockets. So look in the Users Manual for this M'Board and make sure that it's actually in Dual Chanel Mode as this is faster than in Single Chanel mode which is 50% of the CPU's front side bus speed.
Setting the RAM to Dual Chanel Mode will increase the Boot times but not anywhere near the amount you are talking about here.
Col
This discussion is closed to new replies.
Trending Software posts
Sort by Trending