85 replies
by bwheel
by akstephr
Ok, interesting one you have here
I think we can rule out virus for starters. From your description I understand that you have managed to delete the files and they are now residing in your recycle bin? From this point there are a few things you could try:
1. I imagine you have tried this (but I will mention it just in case), try emptying the recycle bin
2. If you recycle bin won't empty, try to restore them to the original folder. Once they are back in your file system, delete them again but hold down the shift key as you do it, this will result in them bypassing the recycle bin and being deleted directly
3. If they refuse to be deleted because of "file in use" etc messages, try shutting down all running applications including TSR etc. Press CTRL ALT DEL and bring up the close program window, shut down every program running in that window that you can, then try to delete the files again
4. Start your PC up in safe mode and try delete the files while in that mode
5. Try repairing your installation of WIN98 by running the setup program again
6. I imagine you have also tried this (but I will mention it just in case), try running any Norton check disk type utilities
7. Try deleting only some of the file at a time
From what you have mentioned, the above 6 options (or a combination of the above) hopefully will give you some direction to go in.
Best of luck
Daryl Sheppard
daryl_s@iprimus.com.au
by akstephr
The "_ _" files maybe content illegal characters in their names. I have the same problem when I try saving some file to a Cyrillic filename. The Cyrillic letters convert to "_"'s by themselves.
I think that is the reason for the NAV lockup. Norton programs cannot deal with such filenames.
I suggest that you run Norton Disk Editor (or other tool for direct disk editing) and manually replace the wrong symbols to correct, or, place the the symbol 20h at the first palce by which the file will be assumed deleted.
All this operation must be done when the PC is restarted in DOS mode.
Good luck
by akstephr
Try to put the hard drive in another computer as a slave drive. Make sure that you are not starting the OS from the bad drive. By not using the OS from the hard drive you can do some things that are otherwise impossible. DO NOT EXECUTE ANY FILES FROM THE DRIVE. (To avoid infecting the new drive.)
Do a complete disk scan of the bad drive.
Try to delete the files. If this does not work then you'll have to either go the disk editor route or copy your documents and files and then reformat.
There was a virus a couple of years ago that quietly encrypted parts of the hard drive in the background. The encrypted segments were next to impossible to delete. Reformatting was usually the only recovery strategy that worked. Another benefit of reformatting is that you can be more confident that the virus has in fact been erradicated.
by akstephr
by susan tech
I did a Google search and came up with this
http://www.textfiles.com/apple/DOCUMENTATION/protalk
... users add questions or A)dding a few questions yourself. There is a file called
PROSCRN included with ProTALK. I did =NOT= write it, so don't give me undue ...
28k - Cached - Similar pages
Protalk is a programme that was designed for Apple and I cannot assume anything but maybe the document on the link will give you some ideas. Maybe the author of the programme may help you in some way. The document is an extremely long so I didn't read it.
The other option would be to find a DOS antivirus programme (F-Prot, etc) and do a scan at DOS bootup. All else fails, format after backup.
P.s for virus info I go to Microtrend for RESULTS (Nortons not so good).
by akstephr
by jonmc
Have you tried renaming one of the files before deleting?
When in DOS, does the DIR command show you the RECYCLED directory on the C:\ drive?
Can you right-click on one of the files (after restoring from the recycle bin) and view Properties? If so, can you uncheck the Read Only box?
by akstephr
by jereg
by akstephr
search for attrib.exe and then type the following in dos:
attrib -r -h -s -a c:\recycled\*.*
del c:\recycled\*.* and press y to the question that follows.
rd c:\recycled
Now restart your computer. Those files should be deleted. and how is it possible that 2 or more files have the exact same name? and then try updating Norton Antivirus, or better yet, use the MS-DOS version.
by akstephr
by mattl
by akstephr
by philthegreat
I think it is a system problem.
1) Do you know what is PROSCRN in your computer? Do it means "Product Screens" or related to Apple's product? The name of the directory implies some kinds of old programs.
2) If it is old programs, then it may be the programs identification problems. Or it may be due to the fonts unrecognized by your computer.
3) If the problem is found just after a crash of computer, it may be a corrupt of the FAT or hard disk failure causes it.
Suggestions:
1) Do ascandisk. It may fix the problem.
2) If it does not, run "sfc"; don't correct the problem files the first time. Write down all the files listed by the computer to see if it is the system crash has caused the problem.
3) If you are sure now, then replace and updated the files suggested by "sfc" now.
4) Rename the __ by other recognized name.
5) The problem does not lie in the recycled bin, it is the software. The system cannot recognize the name of the file system.
After all that, please try to use this freeware to kill all the wrong registry.
"Regcleaner" in www.jv16.org
It is very powerful and it will help you to eliminate the wrong registry.
Tools-->Registry Cleanup--> Do them All
by akstephr
by @lberto
If I were you,
Press F8 when it is booting up
select Safe mode Command Prompt Only
then:
cd \recycle
attrib -h -r -s *.*
del . (then press Y)
cd \
then start it up the normal way. When windows is up and running again you should make sureyou have your latest virus denifition file updated, run scandisk and scan the whole hard disk, all files
It should make it,
Good luck.
@lberto
by akstephr
by cdeclercq
Boot into dos, the recycle bin is hidden. DO NOT DELETE IT by execute this command.
del C:\recycled\*.*
if that does not work, use the dir /ah to show hidden files. THe recycled should show. Then attrib -h C:\recycled to unhide it. then you should be able to delete the files. you may have to write a script that renames them for using the for loop command.
try ren *.* delme.1 or something.
by akstephr
I ran across this problem and you will not believe it but Norton caused it.
The easiest way to remove files that are stubborn, including hidden files is to use the deltree command as follows:
deltree /y c:\recycled\*.*
Make sure that the deltree command is in your c:\windows\command directory. It will take a few minutes to remove 11,000 files but it is foolproof.
Good luck.
Paul.
by akstephr
by akstephr
by penguinsrule
Everybody's already covered all my suggestions
run scan disk
Check the file attributes in Dos
use deltree to delete the tree
by akstephr
this is probably not a virus, a program (maybe nav itself) corrupted the file.
this can not be solved in windows since windows doesn't recognoze those weird characters and doesn't know how to handle them.
boot into dos mode and go to the recycled folder. (name could be recycler, or recycled, don't remember exactly how dos will name the folder)
then use the attrib command (attrib *.* -h -s -r)
and the use deltree (deltree *.*) to delete the contents of that folder.
and then boot then to windows and you are done.
regards,
Leopold
by akstephr
by paul larsien
I had this same thing happen on several W98 machines I was running, before installing SP2. The problem was a bug that allowed the removal of a program, but replaced the files with placeholders for verification. The bug caused the verification to stop prematurely and thus engraving the data into the drive. I ran SP 2 after this, and it helped for a while, but I still occasionally found placeholders, and yes they would hold up both virus scanning and scandisk. I ended up re-imaging all the boxes and installing the appropriate patches right away.
Good luck. I suggest you reimage. PDL
by akstephr
by akstephr
I did not see in any of the answers the obvious answer. Get on the internet and
Download from MacAffe and/or Norton the most recent version of their antivirus software. If this is a new virus and your software has not been updated, your old virus software will not protect you from new viruses. No offense against MacAfee/Norton, but those people who answer the phones dont always give you the best information. Usually they are not MCSE's. You should also do the same thing and update your Win98 to SP2. You can download the updates to Windows 98 free at www.microsoft.com If both of those fixes dont work, then I would suggest backing up important files, reformatting, and then reload your operating system. My instructor for MCSE classes recommends reloading your operating system on your computer every 6 months or so. Whenever I reload my operating system, my computer runs faster and like new again. It is very easy to accumulate junk files that are hard to delete. Reformatting gets rid of all the junk files and you start fresh. LB, MCP
by akstephr
by istal
Just try this URL (it's not just like that) :
housecall.antivirus.com
All best.
by akstephr
by otura
by akstephr
by jphamel
Your were not far with the answer for McAfee,
You have to boot in dos mode.
Reboot in dos mode.
form c:\
type cd recycled
when you are there
the prompt says c:\recycled>
delete the content of recycled.
It worked for me. It should work for you.
It's the only way I've been able to flush peristent content from recycle bin, Try it out.
by akstephr
You need to re-boot in DOS mode before you can mess about with system folders, otherwise windows may not allow you to delete/alter them.
Once you're there the following should do the trick
'make sure you're on drive c
c:
'change to the root dir
cd \
'clear the h(idden) and s(ystem) attributes of the recycled folder
c:\windows\command\attrib -r -h -s recycled
'delete the entire directory (/y avoids prompts)
deltree /y recycled
're-create the directory
md recycled
'reset the attributes
attrib +h +s recycled
Hopefully this will help
by akstephr
by cyberace
hi
..looks like all the possible answers have been give..anyway here is one more
in windows restore the deleted files from recycle bin
reboot ur system in safe mode command prompt only
cd PROSCRN
dir (to check if u can see all the files)if u can see all the files..
del *.*
cd ..
rd PROSCRN
if u can't see the files ..
attrib
attrib -h -s -r *.*
del *.*
cd..
rd PROSCRN
hope this help
Good Luck
by akstephr
by denodave
by akstephr
I can't add any additional suggestions. If the suggestions posted here already do not correct the problem, I think you'll either have to live with it or rebuild the PC.
I did want to caution you about deleting everything in the recycle bin, however. Windows stores a hidden file called desktop.ini in the recycle bin. You will need this file for the recycle bin to function correctly. I suggest you save a copy of this file prior to deleting all of the other files.
Good luck
by akstephr
by geek2d
by akstephr
by brent t
Hey,
Tons of great answers, however it sounds like the FAT is messed up. Perhaps not totally but I would look at running a third party disk utility like Norton to try and clean it up. Other than that I would try and rename it to a valid file name and try and delete it again.
by akstephr
by brent t
Hey,
Tons of great answers, however it sounds like the FAT is messed up. Perhaps not totally but I would look at running a third party disk utility like Norton to try and clean it up. Other than that I would try and rename it to a valid file name and try and delete it again.
by akstephr
by saniblue2002
Check out this article
" Cannot Delete Files or Folders with Extended Characters [Q131702] ". You can find it in TechNet.
I think this is the answer.
by akstephr
by saniblue2002
Check out this article
" Cannot Delete Files or Folders with Extended Characters [Q131702] ". You can find it in TechNet.
I think this is the answer.
by akstephr
by sperez
by akstephr
by mm212
Boot into DOS mode and type "deltree recycled" and answer "Yes". Reboot. Windows will automatically recreate the Recycle Bin for you.
If you have more of these files elsewhere on your hard drive, connect this drive as a slave on a Windows 95 computer. I've run into invalid characters on downloaded files and the only way to delete them was to connect over the network from a Windows 95 system and delete them that way. Strange, but it worked.
by akstephr
by tjc
by akstephr
by ricky
You'll have to do it from the DOS Command prompt... Win 9x cannot handle such file/folder names.
Try using the DOS "CD" command to get into the Recycled folder. If that doesn't work --you may need to first use Win Explorer (in GUI mode) to open the recycled folder, and then with it open use the Start->Run->Command (from the start menu) to open a MS DOS Window.
Recycled should be your default folder.
Then (in the S|MS DOS Window) use the DOS DelTree command to get rid of all unwanted folders and files.
Should solve your problem... ;-)
by akstephr
by acs
by akstephr
by fyrman24
by akstephr
by bhrdwh
1. Run scandisk on your C: drive, let scandisk fix all problems / changes
2. Search & Delete all .CHK files fro C: Drive.
3. Empty Recycle Bin.
4. Also try Deltree C:\ProScrn folder.
5. Just to be sure, did you ever get any msg at boot "DIS IS ONE HALF !!" ... msg for one half virus that makes these _ fodlers, which you cant remove. Then you need to boot froma clean disk & remove it.
6. Just to confirm, Go to C:\> mem /c/p
7. Check "COnventional" Memory Summary - The size must always be 655360.
If more or less, there is a memory virus in your system, probably residing in boot sector.
If this is the case, I suggest you backup your docs / data & remove all partitions, make it again & format the entire C: Drive, load the OS again.
All the best,
Akash
Akashdeep_B@yahoo.com
by akstephr
by white wolf
I assume you ran Norton Disk Doctor, Scan disk, and the like on the system hoping it was merely a disk error, but find to your disgust that these files aren't a disk error. I ran into the same situation as you, where using all the common methods didn't seem to nix the files.
I suspect you'll have to do here the same thing I did, which is turn to one of the 'industrial strentgh' File manager utilities. Specifically,
what you need here is a utility that will let you see and handle file (and in this case, delete them) regardless of thier attributes.
So, for handling this problem on a dos machine, I'd normally turn to using the old venerable Norton commander, unfortunately, since that's problably not available anymore I'd suggest you try one of the very close clones of them at (http://hjem.get2net.dk/fec/volkov/volkov.html, just scroll down the page and use the download link to get it.) I used norton commander to solve this problem by just rebooting to dos, bringing up the utility,navigated to the dir, selected the files in question, and deleted them. The whole process was done in under five minutes.
Plus, you can also get very good windows versions of these norton commander clones, the one I recommend is the Servant Salamander available at (http://www.altap.cz/salam_en/index.html).
Just make sure your set the option to not use the recycle bin when deleting files for this particular problem.
Now I realise, there's a little learning curve with theses utilities,but once you master these babies, "you won't want to leave home without them" - thier real handy for doing system administration and technical work on multiple systems!!!
Good Luck!
by akstephr
by mrsnib
You had the right idea with using DOS.
Using it the following way it will work
From Windows Start menu choose Run
type dosprmpt and press Enter
a DOS window will open
type CD \RECYCLED and press Enter
type DEL . press Enter
a prompt will ask to confirm deleteing all files in directory answer with a Y
Close the window
I had to throw something in the recycle bin and empty it to refresh the icon.
that's all
mrsnib@nac.net
by akstephr
by michaeltubs
by akstephr
by nyghtfall
by akstephr
by akstephr
This discussion is closed to new replies.
Trending Software posts
Sort by Trending