Question Locked

HP 4200 Network Printer Errors

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have a HP 4200 Printer that is used by 30+ people in one section of the office. Since a couple of days ago no one has been able to print correctly on the printer. When on person wants to print multiple pages it prints all the pages on 1 page. Strange I know. Then if someone changes the print settings it changes the print settings on all the computers. We have all reverted to an old network driver, installed a newer driver, installed the original driver and everything else. What could be the issue?

4 replies

by churdoo

Could be the printer itself. Was there an event a couple of days ago corresponding to when this problem started?

I suggest doing a factory reset of the jet-direct card and printer, and reset the IP settings in the jet-direct. Test from one workstation using the latest driver. Also test through the local USB or Parallel to eliminate the jet-direct card as the problem.

Call a local HP Authorized repair tech if you have to since the problem could be the formatter board in the printer. A competent printer tech can do in an hour or two, what you or I would dork around with for way too long.

by ssnephew

We are having the same issues with our 4200, No updates have been ran, except for windows updates, we have tried different drivers, firmware updates. It seems to be linked to a Windows Update that was just released, Not sure on which one.

This discussion is closed to new replies.