6 replies
by jonny3 Accepted solution
by shasca Accepted solution
I would run several self test/configuration Pages while standing at the printer to isolate the sound.
In most cases replacing a cartridge, or the transfer kit has eliminated the sounds here. But the feed rollers can dry out too.
Also if the printer has more than one feed try try moving the paper to it to help find the location.
Time for some detective work on your part.
by jdmercha Accepted solution
Use a can of compressed air to blow out all the dust and dried toner, which can also be a source of noise.
If none of this works you may have to call an authorized HP sesrvice center to get it taken care of. But based ont he age of this model, that might not be worth the cost. I'd put up with the noise or look for a replacement.
by oh smeg Accepted solution
by grandhighdruid Accepted solution
by ctmoore1998 Accepted solution
This discussion is closed to new replies.
Trending Software posts
Sort by Trending