Discussion Locked

Is Symantec they way to go?

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a harddrive and I need to move all the data and software from the current Harddrive to a larger hd. The current hard drive is just to full. My question is: Would symantec ghosting software do the job? This harddrive has very sensative data. I do not feel comfortable enough to just save all the files, data and then do a reinstall of the OS and all other software needed. I think I might just miss something. So, I would like to just ghost all the data and software to a larger hard drive. Will ghosting pick up software as well as data? Or is there a better way to go? This system is running win98se.

9 replies

by thechas

Ghost should do the trick.

Or, many drives come with utilities that make it easy to copy an old drives contents onto the new drive.

I have used the utility that comes with Western Digital drives, and it works well, IF you run it manually, and just copy the drive contents onto partitions that you have setup with fdisk.

Another alternative, is to boot into DOS from a floppy, and use the DOS copy commands.
xcopy should do the job.

Chas

by cg it

Another option to TheChas recommendations is to make the current drive a slave and the new drive a master & boot drive. Then you can, at your leisure, copy programs,folders, files, and any thing else you might want from the old drive to the new larger drive using explorer.

by sgt_shultz

put the new drive in the computer along with the old drive, get it f-disked and formatted, then from windows, run a command prompt. then run this command: (let's say your old drive is c: and your new drive is e:)
xcopy32 c: e: /c /h /e /k /r /f
that will copy the new hard drive to the old hard drive.
to understand what you are about to do, first run xcopy32 /? to see what the switches do.
hope this helps...
i'd do a ghost anyway, but xcopy32 is a great, built-in way to dupe hard drives inwin98, imho.

by paulp

To elaborate on answer #2 you could put the old drive as master on the secondary IDE controller and the new drive as the master on the primary IDE controller. Then you won't have to worry about messing with the jumpers on the drives.

This discussion is closed to new replies.