Question Locked

Konica Minolta 5440DL

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I run this printer straight from my PC (running NT). It had previously run from a network and after some problems was working fine. Now that I am no longer part of that network I am having problems again. Sometimes it prints ok but most of the time the print queue will say (under size) something like "130KB/ 132KB" and it won't print anything (or maybe the first couple of pages). Some large documents seem ok (eg 2MB word document) whereas some small documents don't print at all. I have downloaded the new print driver and still no luck. Any thoughts?

4 replies

by rob miners

you shouldn't have to do it very often. ;)

1. Go to Start, Control Panel and Administrative Tools. Double click on Services icon.

2. Scroll down to the Print Spooler service and right click on it and select Stop. In order to do this, you need to be logged in as Administrator. At this point, no one will be able to print anything on any of the printers that are being hosted on this server.

3. Next you need to go to the following directory: C:\WINDOWS\System32\spool\PRINTERS. Delete all the files in this folder. This will clear all print queues (it?s a good idea to first make sure there are no other print jobs being processed on any of the other printers on the server because doing this step will delete those jobs also)

4. Now you can go back to the Services console and right-click and choose Start for the Print Spooler service!

You can also go to a command prompt and type net stop spooler or net start spooler to start and stop the service.

< forgot the info >

Let us know how you get on.

by kevinsmith

Thank you for the suggestions.

I did what you suggested (albeit that the icons are somewhat different in my version on NT so I just went via All Programmes).

There was nothing in the file when I looked at ...spool|PRINTERS. When I turned the spooler back on and tried to reprint I had the same problem as before. (eg a large file with 9 pages just printed the first page and the printer queue showed size "773 KB/4.04MB".

Thanks for the suggestion. Any further suggestions would be gratefully received.

by rob miners

I can't find a reference to your problem in it though.

Print the configuration (CONFIG) page to verify the printer is printing correctly,
or to check the printer configuration.

Are you trying to Print Duplex if so check your Paper and also check the Margin Settings and Default Paper size in the Document and the Printer itself.

Only plain paper, 60–90 g/m2 (16–24
lb) can be autoduplexed. See “Media
Specifications” on page 38.

ftp://ftp.minolta-qms.com/pub/cts/out_going/manuals/5440dl/ug54dl_en.pdf

This discussion is closed to new replies.