Question Locked

MS Office 2003 - HP All in One

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Office Pro 2003@save as' problems

System was mapped to a storage device drive on a peripheral (HP All-in-one). Disconnected "Z" drive and it solved the problem.
Received helpful information from this forum

HOw do change where system is mapped to?
HP tell me that I do need the Network card on order to connect to my All-in one product??

3 replies

by Former member

I will need more info to go on here. If you need to use your all in one device on a network then your can just select the device and then just share it. As for mapping a device this is usually only done for hdd's or any back up devices.

Please post back if you have anymore problems or questions.

by ic-it

if you are on a LAN (network), set the printer up with an IP address, use the network gateway, etc. On the computer, add a printer - local (uncheck automatically detect blah blah). Use create a Standard TCP/IP port- enter the Printers IP address, and follow the prompts.

This discussion is closed to new replies.