Software

Ask something
Question Locked

Network

0 helpful
2 replies

by anizone2000123 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i want to know the criping manual like strait & cross criping..

can u give me the manual or pdf file..

thank u
by anto..

2 replies

by 1bn0

I believe this is what you are looking for.

This is the best reference I could find.

Pay attention it to void confusion.

There are two standards for Ethernet RJ-45.

T568A and T568B. The difference is ONLY THE COLOR CODE FOR THE WIRES. The pins connect the same regardless.

One is based on the original Nortel ISDN standard and the other one is what almost everyone else decided to use. :)

Since they never came to any agreement, and technically the signal doesn't care what color the wire insulation is they are both acceptable.

DO NOT INTERCHANGE THEM on the same site.

Beware becoming used to using one color scheme and the going to another site where they have standardized on the other. You will end up making crossver connections when yo u mean to make a straight connection and vice-versa.

A crossover is basically a cable or connection wire T568A at one end and T568B at the other.

Study the web page. It's a good representation.

http://www.ertyu.org/steven_nikkel/ethernetcables.html

This discussion is closed to new replies.