Software

Ask something
Question Locked

plz help me..........

0 helpful
4 replies

by vijaydga

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Check Corect Value of CPU
Press F1 to enter SETUP,
Check if you have the correct value of CPU, or try to change it.

Do you hear a "beep" when starting your computer?
No there is no beep what shall i do with that
what has to be done
how to correct i want the sollution

4 replies

by absolutely

The solution is to fix your hardware problem that is indicated by the lack of beep, not change the information in the BIOS.

by nicknielsen

Your CPU is most likely bad and will need to be replaced.

by oh smeg

The problem has arisen because the CPU is not allowed to Auto Detect and has been Manually set to the wrong value. Generally the wrong FSB and Multiplier have been set to the correct Speed of the CPU.

However because the Specifications are wrong you need to correct this setting in BIOS and then the POST will finish and beep.

Col

This discussion is closed to new replies.