Question Locked

Recording and managing input data from tcp port

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all, after many days searching and probably not using the right key words, I'll very appreciate your help.

I have a linux system only accessible through SSH. Configuring the SecureCRT, I successfuly opened a two ports (5123 in linux and 15000 in windows) and forwarded the results from a tail -f to /dev/tcp/localhost/5123.

When listening in windows' port 15000 I can see the results as desired.

I'm looking for an open source program capable to listen my local port on windows, capture and store the data. Would be great if possible to manage the data and export/interface with Excel (for example).

My final objective is to create a real-time alert when a chosen string is perceived.

I can't install anything on linux and I have no admin permissions to install on windows.

Has someone any suggestions?

Thank you all in advanced, Fernando

5 replies

by thumbsup2

You said: [i]"My final objective is to create a real-time alert when a chosen string is perceived.

[b]I can't install anything on linux and I have no admin permissions to install on windows."[/b][/i]

This sounds like a work environment. Have you consulted with your System Administrator and Supervisor?

.

by the altruist

Definitely sounds like a work environment. Without admin rights, you're in a pickle. Contact the sys admin, and see if you can be authorized a packet sniffer/capture/monitor/etc. program. I prefer Wireshark (formerly Ethereal), but there are others available. Be aware that it might take some time. I once spent over an hour trying to string together 20 seconds of data.

http://www.tech-faq.com/packet-sniffer.shtml

by paulistain

Thank you for your help. I tested with some sniffers but they are not designed to give me the results I'm wondering.

I have a listener that is capable to receive the output but it's the same thing than exporting the output to a file and puting it by sftp.

I saw some SNMP trap collectors, but they are designed to work with SNMP messages, what is not my case. I'd like to have freedom to manage the collected data.

Anyway, thank you for your support.

Cheers

by paulistain

Thanks for your message and opinion.

To clarify. I just presented a scenario to deploy a solution.

I don't want to install any tool in the linux side, since the system was certified as this. Applying a command to forward the log messages won't compromise.

I want to deploy a solutions were non admin rights are necessary. It will be distributed for other users without admin rights. If there aren't, it's not a problem!

Thank you again

This discussion is closed to new replies.