Discussion Locked

Should I reserve IP addresses

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm currently running a network of 200 users on a class "C" internal network scheme and a single public IP address. I expect to grow to approximately 300 users shorly and would like to increase speed on the public side. The internal network is basedon 100MB switches and is working exceptionally well. I would like to increase the speed on my Internet connection, Should I be concern with more IP addresses? Bandwith on my existing T1? What would you recommend?

Appreciate your input.

CM

7 replies

by ebob

1 - If you can get them, go for it. But that's probably easier said, than done.

2 - I this day and age, I recommend using any of the "private" address spaces, appropriate to your size of organisation. For example:

10.0.0.0 - 10.255.255.255 (10/8 prefix)
172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
192.168.0.0 - 192.168.255.255 (192.168/16 prefix)

are the reserves, as indicated in the RFC (see: http://www.isi.edu/in-notes/rfc1918.txt).

For your size organisation, you might wantto use subnets of the 172.16.0.0/12 space.

For connecting to the Internet, just fire up address translation on your firewall/router. If you're using PAT (Port Address Translation, aka NAT with "overloading") then you will only need one address onthe Internet for all of your "dynamic" users. Of course, you will want to establish tunnels through your firewall for your email servers, etc., each of which will likely eat up another of your registered addresses.

As for BW: It depends on what you're using now. Check your router and look for queues in the buffers, and also for simple usage statistics. Your ISP can also help guide you on this. In general, a T1 should be sufficient for a medium size org. of 200-300 users.

by stillatit

1. Clearly, since a class C address will only give you 254 addresses, you will have to do something.

2. Whether you decide to move to a class B address or add an additional class C address will depend on your router. Read the manual and find outwhat it can do with regard to NAT. Some will only provide NAT for one class C, others only contiguous ranges. If you are assigning the local addresses, it will be better if you can add a class C, since you would not have to renumber. If you are using DHCP, it should not matter much.

3. Consult with your ISP about how much traffic you are really putting on your T1 now. It may be the case that your router and its NAT function are the bottleneck, rather than the line capacity. If it is the line, ask your current vendor what options are available at what cost.

Good luck.

by kevin

I wouldn't concern myself with ip address' if your main concern is speed. 300 users can grind a T1 to a halt if your users are bandwidth hogs. You may want to consider blocking certain types of traffic(Streaming video and audio) to see if the results in a speed increase before augmenting your existing T1.

This discussion is closed to new replies.