Question Locked

Some Wireless will work while others will not?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

I am currently running a small network (22 computers) in our barraks in Iraq. We are using 2 D-Link DIR-615 routers set up as access points coming off a Hughes HX50 modem/router.
Right now I have several computers that although they register as conected to the network,(I can see them on the network with network magic) the IE 7 browser will not surf the internet.
Thanks, Mike

3 replies

by oh smeg

But for starters I would look at the OS in use on the computers not connecting. Some different OS's have some special Needs when it comes to WiFi Networking and you need to setup more than just the WiFi Connection.

Example

[i] Windows is not configured to connect to the right type of network.
Check the information that came with the router or access point to find out what connection mode the device is set to. The mode should be either ad hoc (when devices communicate directly without going through a router or access point) or infrastructure (when devices communicate by going through a router or access point). Make sure the setting in Windows for this network matches the setting on the device. To check this, follow these steps:

1. Open the Command Prompt window by clicking the Start button , clicking All Programs, clicking Accessories, and then clicking Command Prompt.

2. Type netsh wlan add filter networktype=network type.

Where network type is either adhoc or infrastructure.[/i]

You can find more information on Configering Vista here

http://tinyurl.com/5pmx7f

Col

by zlitocook

Even if you are not using Cisco equipment go to thier web site. They have a great tool/game that shows how to place NAP's and other great info on wireless stuff.
And you can look at things like are all the NIC's using the same software/firmware? Are all the computers on the network on the same SP, and I assume you tested the NIC's to be sure they all commuicate?

Do the simple stuff first, clear all cookies, temp. files and history. And be sure you do it by profile too. Move a non working computer to a working computer area to see if it connects to the internet. If it does then it could be the location, the access point or a blockage like a wall or microwave.

This discussion is closed to new replies.