Question Locked

uninstall compaq presario c500 laptop bios

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
hi, i hv installed xp sp2, i hv updated my bios, now it's not detecting hdd, in bios it's there. i installed ubuntu os there is no prob. but now i m not able to reinstall xp.. its telling hdd is not detected.. any one can help to solve this prob. i hv downloaded bios from hp site for my product only... help me pls..

3 replies

by rob miners

an ealier BIOS flash or this.

You may have to Slipstream the Sata Drivers for your Motherboard if you don't have access to a floppy drive. You can also use this method to Slipstream SP2 or SP3. You will also have to know the Make and Model of your Motherboard to get the right Sata drivers.

http://www.maximumpc.com/article/howtos/how_to_slipstream_windows_xp_sp3_and_vista_sp1

Integration of the Intel SATA AHCI or SATA RAID drivers by using nLite

http://www.msfn.org/board/Integration-of-Intel-Sata-and-Raid-drive-t107504.html

Extract and Copy the SATA Drivers to a Floppy Disk. Boot from the XP CD and when prompted, press F6 to install the SATA drivers from the floppy disk. If you haven't a Floppy Drive Slipstream your XP installation with the SATA drivers.

How To: Slipstream your XP installation

Download nLite

http://home.midmaine.com/~nlite/nlite/nLite-1.4.8.installer.exe

Guide for using nLite

http://www.nliteos.com/guide/

These are the steps that I took

Download the Sata Drivers from the manufacturers web site.

Installed Nlite

Extracted Sata Drivers to a folder named Sata

Copied the entire XP CD to a folder named XPS

Ran Nlite and Browsed to the XPS folder, click next, next then selected Drivers and Bootable ISO click next

At the Drivers Tab click insert, single driver and navigate to the folder with the inf for windows XP.

Highlight it and select open and select next. Select Textmode driver and select the XP Sata driver and click OK.

Click next and Yes to apply changes, next and select Make ISO. Use Nero or similar to burn it to a CD.

by oh smeg

You need to either use the HP Recovery Disc or make a Slipstreamed Image of a XP Install Disc and include the SATA Driver for this Compaq. For a full description on how to proceed here look at the above post.

Though if you did install Ubuntu you do need to delete the 3 Partitions that the Ubuntu Install Created so either use the FDisc and delete the Non DOS Partitions or a Wiping utility like Boot & Nuke to wipe the entire Drive.

http://www.dban.org/download

Col

This discussion is closed to new replies.