Software

Ask something
Question Locked

windows blue screen

0 helpful
17 replies

by nitish_dhar2000

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i get this blue screen while booting my xp ....tried safe mode again the blue screen and same problem with the last good configuration option also...wat to do...i think the problem is because of sm new drivers ihad installed lately but i dont remember which drivers i had installed...so nw i thought about using recovery console....but it has no command for rolling back newly installed drivers...hw can i use recovery console to delete these problem causin drivers???or is thr anything else i can do???

17 replies

by nitish_dhar2000

cant say....it just appears for a fraction of a second and then disappears

by jdclyde

SOMETIMES it will actually pause the system.

by nitish_dhar2000

cant say....it just appears for a fraction of a second and then disappears

by older mycroft

You can't get past the boot without immediately hitting a blue screen, and safe mode results in a blue screen as does last know good configuration.

Have you tries accessing System Restore from Safe Mode?

You WON'T be able to use Recovery to roll back the problem drivers - BUT - you can use Recovery to do an in-place install: it will install the basic drivers, overwriting the problem ones in the process.

by nitish_dhar2000

i told u safe mode is also showing blue screen and then getting restarted....

error is smthing like:
00000...6B(000...7A,000...8,000000,000000)

by older mycroft

Or perhaps I misunderstood you.

I thought you had had some success getting to the menu screen for Safe Mode - you posted that you had tried 'Last Known Good Configuration'. I was suggesting that you picked 'System Restore' from the same menu.

As to performing an in-place install:

http://support.microsoft.com/kb/315341

by older mycroft

An entry for "System Restart on Error" or something like that.

If there is an entry for that, disable it: it'll stop the Blue Screen disappearing, leaving it onscreen until you physically turn off.

by ic-it

If so hold down the space bar until Go Backs menu options are displayed. Then roll it back.
Determine if the driver is hosed or if the driver is incompatible. Otherwise reboot and use the space bar again to get rid of that Piece Of S**t Go Back.

by hulixiao

Bluescreens on NT-based Windows systems are usually caused by poorly-written device drivers or malfunctioning hardware. In the Win9x era, incompatible DLLs or bugs in the kernel of the operating system could also cause bluescreens. They can also be caused by physical faults such as faulty memory, power supplies, overheating of computer components, or hardware running beyond its specification limits.
You can try to clean your registry.
Doa free scan with Errorfix.http://www.make-pc-faster.com/

by computechdan

i would do what i could to be sure it's not a hardware related problem

these simple steps don't take very long and could reveal the problem

disconnect any cards or devices not needed for system to start, system only needs a hard drive, ram, cpu, and video to start

if you have more than one stick of ram, try
starting on just one stick at a time

if you have an extra power supply, try it

by darryl~

I'm sure the problem has been solved by now

This discussion is closed to new replies.