Discussion Locked

win2000pro user limits on p2p networks

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have found there to be a user limit of 10 users on any share i set up i have a need for 13? any easy answer besides going to Win2000Server?

5 replies

by lordinfidel

You have almost answered your own question.

2K pro has a built in limit of 10 connections.
Server does not have this limitation.

There is no way to up/break the limitaion in 2kpro.

You will need to purchase 13 cals when going to server.

by bib1eb0y

If you are shareing to 13 different computers, P2P is a bad idea, IMO. Before the flames begin, I too, have 12 NT/W2K servers I administer.

That being said, I would recommend you download a copy of RedHat 8.0 from here:

ftp://kickstart.linux.ncsu.edu/pub/redhat/linux/8.0/en/iso/i386/

and then setup your server to run SAMBA.

If you need any help with setup/install/config of the linux box, please don't hesitate to send me and e-mail, I'd be glad to assist.

by lordinfidel

While it's true 2k has the same basic engine be it pro/srvr/adv srvr. Each just has certain features enabled.

The general rule of thumb has always been less then 10 users can be in a p2p netwk.
(Although I disagree with it in today's climate, opting for the more strict client/server model).

If you have more then 10 connections you should be going to a server product anyways and take advantage of domain security.

by jgaribayjr

In a P2P netwrok you can only have up to 10 somputers on the networl. My suggestion is to go ahead and install a server based network.

This discussion is closed to new replies.